config HAS_THUMB2
bool
+# Used for compatibility with asm files copied from the kernel
+config ARM_ASM_UNIFIED
+ bool
+ default y
+
+# Used for compatibility with asm files copied from the kernel
+config THUMB2_KERNEL
+ bool
+
# If set, the workarounds for these ARM errata are applied early during U-Boot
# startup. Note that in general these options force the workarounds to be
# applied; no CPU-type/version detection exists, unlike the similar options in
config ARM_ERRATA_833471
bool
+config ARM_ERRATA_852421
+ bool
+
+config ARM_ERRATA_852423
+ bool
+
config CPU_ARM720T
bool
select SYS_CACHE_SHIFT_5
config CPU_V7M
bool
select HAS_THUMB2
+ select THUMB2_KERNEL
select SYS_CACHE_SHIFT_5
config CPU_PXA
default 64 if SYS_CACHE_SHIFT_6
default 32 if SYS_CACHE_SHIFT_5
+config ARM_SMCCC
+ bool "Support for ARM SMC Calling Convention (SMCCC)"
+ depends on CPU_V7 || ARM64
+ select ARM_PSCI_FW
+ help
+ Say Y here if you want to enable ARM SMC Calling Convention.
+ This should be enabled if U-Boot needs to communicate with system
+ firmware (for example, PSCI) according to SMCCC.
+
config SEMIHOSTING
bool "support boot from semihosting"
help
the hosted environment to call out to the emulator to
retrieve files from the host machine.
+config SYS_THUMB_BUILD
+ bool "Build U-Boot using the Thumb instruction set"
+ depends on !ARM64
+ help
+ Use this flag to build U-Boot using the Thumb instruction set for
+ ARM architectures. Thumb instruction set provides better code
+ density. For ARM architectures that support Thumb2 this flag will
+ result in Thumb2 code generated by GCC.
+
+config SPL_SYS_THUMB_BUILD
+ bool "Build SPL using the Thumb instruction set"
+ default y if SYS_THUMB_BUILD
+ depends on !ARM64
+ help
+ Use this flag to build SPL using the Thumb instruction set for
+ ARM architectures. Thumb instruction set provides better code
+ density. For ARM architectures that support Thumb2 this flag will
+ result in Thumb2 code generated by GCC.
+
config SYS_L2CACHE_OFF
bool "L2cache off"
help
ARM_SOC_BOOT0_HOOK which contains the required assembler
preprocessor code.
+config ARM_CORTEX_CPU_IS_UP
+ bool
+ default n
+
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y
but may increase the binary size.
config SPL_USE_ARCH_MEMCPY
- bool "Use an assembly optimized implementation of memcpy"
+ bool "Use an assembly optimized implementation of memcpy for SPL"
default y if USE_ARCH_MEMCPY
depends on !ARM64
help
but may increase the binary size.
config SPL_USE_ARCH_MEMSET
- bool "Use an assembly optimized implementation of memset"
+ bool "Use an assembly optimized implementation of memset for SPL"
default y if USE_ARCH_MEMSET
depends on !ARM64
help
Such implementation may be faster under some conditions
but may increase the binary size.
-config ARCH_OMAP2
- bool
- select CPU_V7
- select SUPPORT_SPL
-
config ARM64_SUPPORT_AARCH32
bool "ARM64 system support AArch32 execution state"
default y if ARM64 && !TARGET_THUNDERX_88XX
config ARCH_AT91
bool "Atmel AT91"
+ select SPL_BOARD_INIT if SPL
config TARGET_EDB93XX
bool "Support edb93xx"
select DM_SERIAL
select DM_GPIO
select OF_CONTROL
+ imply FAT_WRITE
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
bool "Support vexpress_ca9x4"
select CPU_V7
-config TARGET_BRXRE1
- bool "Support BRXRE1"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
-
-config TARGET_BRPPT1
- bool "Support BRPPT1"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
-
-config TARGET_DRACO
- bool "Support draco"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_THUBAN
- bool "Support thuban"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_RASTABAN
- bool "Support rastaban"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_ETAMIN
- bool "Support etamin"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_PXM2
- bool "Support pxm2"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_RUT
- bool "Support rut"
- select ARCH_OMAP2
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_TI814X_EVM
- bool "Support ti814x_evm"
- select ARCH_OMAP2
-
-config TARGET_TI816X_EVM
- bool "Support ti816x_evm"
- select ARCH_OMAP2
-
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
select CPU_V7
+ imply CRC32_VERIFY
+ imply FAT_WRITE
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
select CPU_V7
+ imply CRC32_VERIFY
+ imply FAT_WRITE
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
select CPU_V7
+ imply CRC32_VERIFY
+ imply CMD_HASH
+ imply FAT_WRITE
+ imply HASH_VERIFY
config TARGET_BCMNSP
bool "Support bcmnsp"
select CPU_V7
+config TARGET_BCMNS2
+ bool "Support Broadcom Northstar2"
+ select ARM64
+ help
+ Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
+ ARMv8 Cortex-A57 processors targeting a broad range of networking
+ applications
+
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select DM
select DM_SPI
select DM_GPIO
select DM_KEYBOARD
+ imply FAT_WRITE
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
bool "TI Keystone"
select CPU_V7
select SUPPORT_SPL
+ select SYS_THUMB_BUILD
select CMD_POWEROFF
+ imply CMD_MTDPARTS
+ imply FIT
+
+config ARCH_OMAP2PLUS
+ bool "TI OMAP2+"
+ select CPU_V7
+ select SPL_BOARD_INIT if SPL
+ select SUPPORT_SPL
+ imply FIT
config ARCH_MESON
bool "Amlogic Meson"
targeted at media players and tablet computers. We currently
support the S905 (GXBaby) 64-bit SoC.
+config ARCH_MX7ULP
+ bool "NXP MX7ULP"
+ select CPU_V7
+ select ROM_UNIFIED_SECTIONS
+
config ARCH_MX7
bool "Freescale MX7"
select CPU_V7
select SYS_FSL_HAS_SEC if SECURE_BOOT
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
+ select SYS_THUMB_BUILD if SPL
config ARCH_MX5
bool "Freescale MX5"
select CPU_V7
select BOARD_EARLY_INIT_F
-config TARGET_M53EVK
- bool "Support m53evk"
- select CPU_V7
- select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
-
-config TARGET_MX51EVK
- bool "Support mx51evk"
- select BOARD_LATE_INIT
- select CPU_V7
- select BOARD_EARLY_INIT_F
-
-config TARGET_MX53ARD
- bool "Support mx53ard"
- select CPU_V7
- select BOARD_EARLY_INIT_F
-
-config TARGET_MX53EVK
- bool "Support mx53evk"
- select BOARD_LATE_INIT
- select CPU_V7
- select BOARD_EARLY_INIT_F
-
-config TARGET_MX53LOCO
- bool "Support mx53loco"
- select BOARD_LATE_INIT
- select CPU_V7
- select BOARD_EARLY_INIT_F
-
-config TARGET_MX53SMD
- bool "Support mx53smd"
- select CPU_V7
- select BOARD_EARLY_INIT_F
-
-config OMAP34XX
- bool "OMAP34XX SoC"
- select ARCH_OMAP2
- select ARM_ERRATA_430973
- select ARM_ERRATA_454179
- select ARM_ERRATA_621766
- select ARM_ERRATA_725233
- select USE_TINY_PRINTF
- imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
- imply SPL_GPIO_SUPPORT
- imply SPL_I2C_SUPPORT
- imply SPL_LIBCOMMON_SUPPORT
- imply SPL_LIBDISK_SUPPORT
- imply SPL_LIBGENERIC_SUPPORT
- imply SPL_MMC_SUPPORT
- imply SPL_NAND_SUPPORT
- imply SPL_POWER_SUPPORT
- imply SPL_SERIAL_SUPPORT
-
-config OMAP44XX
- bool "OMAP44XX SoC"
- select ARCH_OMAP2
- select USE_TINY_PRINTF
- imply SPL_DISPLAY_PRINT
- imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
- imply SPL_GPIO_SUPPORT
- imply SPL_I2C_SUPPORT
- imply SPL_LIBCOMMON_SUPPORT
- imply SPL_LIBDISK_SUPPORT
- imply SPL_LIBGENERIC_SUPPORT
- imply SPL_MMC_SUPPORT
- imply SPL_NAND_SUPPORT
- imply SPL_POWER_SUPPORT
- imply SPL_SERIAL_SUPPORT
-
-config OMAP54XX
- bool "OMAP54XX SoC"
- select ARCH_OMAP2
- select ARM_ERRATA_798870
- imply SPL_DISPLAY_PRINT
- imply SPL_ENV_SUPPORT
- imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
- imply SPL_GPIO_SUPPORT
- imply SPL_I2C_SUPPORT
- imply SPL_LIBCOMMON_SUPPORT
- imply SPL_LIBDISK_SUPPORT
- imply SPL_LIBGENERIC_SUPPORT
- imply SPL_MMC_SUPPORT
- imply SPL_NAND_SUPPORT
- imply SPL_POWER_SUPPORT
- imply SPL_SERIAL_SUPPORT
-
-config AM43XX
- bool "AM43XX SoC"
- select ARCH_OMAP2
- help
- Support for AM43xx SOC from Texas Instruments.
- The AM43xx high performance SOC features a Cortex-A9
- ARM core, a quad core PRU-ICSS for industrial Ethernet
- protocols, dual camera support, optional 3D graphics
- and an optional customer programmable secure boot.
-
-config AM33XX
- bool "AM33XX SoC"
- select ARCH_OMAP2
- help
- Support for AM335x SOC from Texas Instruments.
- The AM335x high performance SOC features a Cortex-A8
- ARM core, a dual core PRU-ICSS for industrial Ethernet
- protocols, optional 3D graphics and an optional customer
- programmable secure boot.
-
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select DM
select DM_SERIAL
select BOARD_EARLY_INIT_F
+ imply FAT_WRITE
+ imply SYS_THUMB_BUILD
config TARGET_S32V234EVB
bool "Support s32v234evb"
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
-
-config TARGET_CM_T43
- bool "Support cm_t43"
- select ARCH_OMAP2
+ select SYS_THUMB_BUILD
+ imply CMD_MTDPARTS
+ imply CRC32_VERIFY
+ imply FAT_WRITE
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
- select SPL_STACK_R if SUPPORT_SPL
- select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
+ select SPL_STACK_R if SPL
+ select SPL_SYS_MALLOC_SIMPLE if SPL
select SYS_NS16550
+ select SPL_SYS_THUMB_BUILD if !ARM64
select USB if DISTRO_DEFAULTS
select USB_STORAGE if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
select USE_TINY_PRINTF
+ imply FAT_WRITE
+ imply PRE_CONSOLE_BUFFER
+ imply SPL_GPIO_SUPPORT
+ imply SPL_LIBCOMMON_SUPPORT
+ imply SPL_LIBDISK_SUPPORT
+ imply SPL_LIBGENERIC_SUPPORT
+ imply SPL_MMC_SUPPORT if MMC
+ imply SPL_POWER_SUPPORT
+ imply SPL_SERIAL_SUPPORT
config TARGET_TS4600
bool "Support TS4600"
select CPU_ARM926EJS
select SUPPORT_SPL
-config TARGET_TS4800
- bool "Support TS4800"
- select CPU_V7
- select SYS_FSL_ERRATUM_ESDHC_A001
-
-config TARGET_VF610TWR
- bool "Support vf610twr"
- select CPU_V7
- select SYS_FSL_ERRATUM_ESDHC111
-
-config TARGET_COLIBRI_VF
- bool "Support Colibri VF50/61"
- select BOARD_LATE_INIT
- select CPU_V7
- select SYS_FSL_ERRATUM_ESDHC111
-
-config TARGET_PCM052
- bool "Support pcm-052"
- select CPU_V7
- select SYS_FSL_ERRATUM_ESDHC111
- select SYS_FSL_ERRATUM_ESDHC135
- select SYS_FSL_ERRATUM_ESDHC_A001
-
-config TARGET_BK4R1
- bool "Support BK4r1"
+config ARCH_VF610
+ bool "Freescale Vybrid"
select CPU_V7
select SYS_FSL_ERRATUM_ESDHC111
- select SYS_FSL_ERRATUM_ESDHC135
- select SYS_FSL_ERRATUM_ESDHC_A001
+ imply CMD_MTDPARTS
config ARCH_ZYNQ
bool "Xilinx Zynq Platform"
select CPU_V7
select SUPPORT_SPL
select OF_CONTROL
+ select SPL_BOARD_INIT if SPL
select SPL_OF_CONTROL if SPL
select DM
select DM_ETH
select SPL_SEPARATE_BSS if SPL
select DM_USB if USB
select BLK
+ select CLK
+ select SPL_CLK
+ select CLK_ZYNQ
+ imply CMD_CLK
+ imply FAT_WRITE
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
select DM_SERIAL
select SUPPORT_SPL
select CLK
+ select SPL_BOARD_INIT if SPL
select SPL_CLK
select DM_USB if USB
+ imply FAT_WRITE
config TEGRA
bool "NVIDIA Tegra"
+ imply FAT_WRITE
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
+ imply SCSI
help
Support for Freescale LS2080AQDS platform
The LS2080A Development System (QDS) is a high-performance
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
+ imply SCSI
help
Support for Freescale LS2080ARDB platform.
The LS2080A Reference design board (RDB) is a high-performance
development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
+config TARGET_LS2081ARDB
+ bool "Support ls2081ardb"
+ select ARCH_LS2080A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select BOARD_LATE_INIT
+ select SUPPORT_SPL
+ select ARCH_MISC_INIT
+ help
+ Support for Freescale LS2081ARDB platform.
+ The LS2081A Reference design board (RDB) is a high-performance
+ development platform that supports the QorIQ LS2081A/LS2041A
+ Layerscape Architecture processor.
+
config TARGET_HIKEY
bool "Support HiKey 96boards Consumer Edition Platform"
select ARM64
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
+config TARGET_POPLAR
+ bool "Support Poplar 96boards Enterprise Edition Platform"
+ select ARM64
+ select DM
+ select OF_CONTROL
+ select DM_SERIAL
+ select DM_USB
+ help
+ Support for Poplar 96boards EE platform. It features a HI3798cv200
+ SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
+ making it capable of running any commercial set-top solution based on
+ Linux or Android.
+
config TARGET_LS1012AQDS
bool "Support ls1012aqds"
select ARCH_LS1012A
select ARCH_LS1012A
select ARM64
select BOARD_LATE_INIT
+ imply SCSI
help
Support for Freescale LS1012ARDB platform.
The LS1012A Reference design board (RDB) is a high-performance
select LS1_DEEP_SLEEP
select SYS_FSL_DDR
select BOARD_EARLY_INIT_F
+ imply SCSI
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
select BOARD_EARLY_INIT_F
+ imply SCSI
config TARGET_LS1021AIOT
bool "Support ls1021aiot"
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
+ imply SCSI
help
Support for Freescale LS1021AIOT platform.
The LS1021A Freescale board (IOT) is a high-performance
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1043AQDS platform.
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1043ARDB platform.
select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1046AQDS platform.
The LS1046A Development System (QDS) is a high-performance
select DM_SPI_FLASH if DM_SPI
select POWER_MC34VR500
select BOARD_EARLY_INIT_F
+ imply SCSI
help
Support for Freescale LS1046ARDB platform.
The LS1046A Reference Design Board (RDB) is a high-performance
select OF_CONTROL
select OF_LIBFDT
select PINCTRL
+ select SPL_BOARD_INIT if SPL
select SPL_DM if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SUPPORT_SPL
+ imply FAT_WRITE
help
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
select CPU_V7M
select DM
select DM_SERIAL
+ select SYS_THUMB_BUILD
config ARCH_STI
bool "Support STMicrolectronics SoCs"
select DM_SERIAL
select BLK
select DM_MMC
+ select DM_RESET
help
Support for STMicroelectronics STiH407/10 SoC family.
This SoC is used on Linaro 96Board STiH410-B2260
select DM
select SPL_DM if SPL
select SYS_MALLOC_F
+ select SYS_THUMB_BUILD if !ARM64
select SPL_SYS_MALLOC_SIMPLE if SPL
select DM_GPIO
select DM_I2C
select DM_USB if USB
select DM_PWM
select DM_REGULATOR
+ imply FAT_WRITE
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
-source "arch/arm/cpu/armv7/mx7/Kconfig"
+source "arch/arm/mach-imx/mx7ulp/Kconfig"
+
+source "arch/arm/mach-imx/mx7/Kconfig"
-source "arch/arm/cpu/armv7/mx6/Kconfig"
+source "arch/arm/mach-imx/mx6/Kconfig"
-source "arch/arm/cpu/armv7/mx5/Kconfig"
+source "arch/arm/mach-imx/mx5/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-stm32/Kconfig"
+source "arch/arm/mach-sunxi/Kconfig"
+
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-uniphier/Kconfig"
+source "arch/arm/cpu/armv7/vf610/Kconfig"
+
source "arch/arm/mach-zynq/Kconfig"
source "arch/arm/cpu/armv7/Kconfig"
source "arch/arm/cpu/armv8/Kconfig"
-source "arch/arm/imx-common/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
+source "board/aries/m28evk/Kconfig"
source "board/bosch/shc/Kconfig"
-source "board/BuR/brxre1/Kconfig"
-source "board/BuR/brppt1/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
source "board/broadcom/bcmcygnus/Kconfig"
source "board/broadcom/bcmnsp/Kconfig"
+source "board/broadcom/bcmns2/Kconfig"
source "board/cavium/thunderx/Kconfig"
source "board/cirrus/edb93xx/Kconfig"
-source "board/compulab/cm_t335/Kconfig"
-source "board/compulab/cm_t43/Kconfig"
source "board/creative/xfi3/Kconfig"
-source "board/denx/m28evk/Kconfig"
-source "board/denx/m53evk/Kconfig"
source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
source "board/freescale/mx31ads/Kconfig"
source "board/freescale/mx31pdk/Kconfig"
source "board/freescale/mx35pdk/Kconfig"
-source "board/freescale/mx51evk/Kconfig"
-source "board/freescale/mx53ard/Kconfig"
-source "board/freescale/mx53evk/Kconfig"
-source "board/freescale/mx53loco/Kconfig"
-source "board/freescale/mx53smd/Kconfig"
source "board/freescale/s32v234evb/Kconfig"
-source "board/freescale/vf610twr/Kconfig"
+source "board/gdsys/a38x/Kconfig"
source "board/grinn/chiliboard/Kconfig"
source "board/gumstix/pepper/Kconfig"
source "board/h2200/Kconfig"
source "board/hisilicon/hikey/Kconfig"
+source "board/hisilicon/poplar/Kconfig"
source "board/imx31_phycore/Kconfig"
-source "board/isee/igep0033/Kconfig"
+source "board/isee/igep003x/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
-source "board/phytec/pcm052/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
-source "board/siemens/draco/Kconfig"
-source "board/siemens/pxm2/Kconfig"
-source "board/siemens/rut/Kconfig"
source "board/silica/pengwyn/Kconfig"
source "board/spear/spear300/Kconfig"
source "board/spear/spear310/Kconfig"
source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig"
-source "board/sunxi/Kconfig"
source "board/syteco/zmx25/Kconfig"
source "board/tcl/sl50/Kconfig"
-source "board/ti/am335x/Kconfig"
-source "board/ti/am43xx/Kconfig"
source "board/birdland/bav335x/Kconfig"
-source "board/ti/ti814x/Kconfig"
-source "board/ti/ti816x/Kconfig"
source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
-source "board/toradex/colibri_vf/Kconfig"
source "board/technologic/ts4600/Kconfig"
-source "board/technologic/ts4800/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"
source "board/work-microwave/work_92105/Kconfig"
projects / people / ms / u-boot.git / blobdiff