arm: dts: dra7: sync DT with latest Linux

[people/ms/u-boot.git] / arch / arm / dts / dra71-evm.dts

diff --git a/arch/arm/dts/dra71-evm.dts b/arch/arm/dts/dra71-evm.dts
index 875116c67fdd9e3b4dafe8adffa5584881dfb6cb..41c9132eb550d07dd686a85eda0296bbfad0b6f7 100644 (file)
--- a/arch/arm/dts/dra71-evm.dts
+++ b/arch/arm/dts/dra71-evm.dts
@@ -7,6 +7,7 @@
  */
 
 #include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
@@ -32,6 +33,16 @@
                          3000000 0x1>;
        };
 
+       evm_1v8_sw: fixedregulator-evm_1v8 {
+               compatible = "regulator-fixed";
+               regulator-name = "evm_1v8";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&lp8732_buck0_reg>;
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
        poweroff: gpio-poweroff {
                compatible = "gpio-poweroff";
                gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@@ -138,6 +149,11 @@
        };
 };
 
+&pcf_lcd {
+       interrupt-parent = <&gpio7>;
+       interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
 &pcf_gpio_21 {
        interrupt-parent = <&gpio7>;
        interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
@@ -157,7 +173,24 @@
 };
 
 &mmc1 {
-       vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+       pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+       pinctrl-0 = <&mmc1_pins_default>;
+       pinctrl-1 = <&mmc1_pins_hs>;
+       pinctrl-2 = <&mmc1_pins_sdr12>;
+       pinctrl-3 = <&mmc1_pins_sdr25>;
+       pinctrl-4 = <&mmc1_pins_sdr50>;
+       pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+       pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+       vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+       pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+       pinctrl-0 = <&mmc2_pins_default>;
+       pinctrl-1 = <&mmc2_pins_hs>;
+       pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+       pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+       vmmc-supply = <&evm_1v8_sw>;
 };
 
 &mac {
@@ -168,13 +201,13 @@
 };
 
 &cpsw_emac0 {
-       phy-handle = <&dp83867_0>;
+       phy_id = <&davinci_mdio>, <2>;
        phy-mode = "rgmii-id";
        dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-       phy-handle = <&dp83867_1>;
+       phy_id = <&davinci_mdio>, <3>;
        phy-mode = "rgmii-id";
        dual_emac_res_vlan = <2>;
 };
@@ -185,7 +218,8 @@
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
                ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
                ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-               ti,impedance-control = <0x1f>;
+               ti,min-output-impedance;
+               ti,dp83867-rxctrl-strap-quirk;
        };
 
        dp83867_1: ethernet-phy@3 {
@@ -193,7 +227,8 @@
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
                ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
                ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-               ti,impedance-control = <0x1f>;
+               ti,min-output-impedance;
+               ti,dp83867-rxctrl-strap-quirk;
        };
 };