#include <linux/types.h>
+/*
+ * IVT header definitions
+ * Security Reference Manual for i.MX 7Dual and 7Solo Applications Processors,
+ * Rev. 0, 03/2017
+ * Section : 6.7.1.1
+ */
+#define IVT_HEADER_MAGIC 0xD1
+#define IVT_TOTAL_LENGTH 0x20
+#define IVT_HEADER_V1 0x40
+#define IVT_HEADER_V2 0x41
+
+struct ivt_header {
+ uint8_t magic;
+ uint16_t length;
+ uint8_t version;
+} __attribute__((packed));
+
+struct ivt {
+ struct ivt_header hdr; /* IVT header above */
+ uint32_t entry; /* Absolute address of first instruction */
+ uint32_t reserved1; /* Reserved should be zero */
+ uint32_t dcd; /* Absolute address of the image DCD */
+ uint32_t boot; /* Absolute address of the boot data */
+ uint32_t self; /* Absolute address of the IVT */
+ uint32_t csf; /* Absolute address of the CSF */
+ uint32_t reserved2; /* Reserved should be zero */
+};
+
+struct __packed hab_hdr {
+ u8 tag; /* Tag field */
+ u8 len[2]; /* Length field in bytes (big-endian) */
+ u8 par; /* Parameters field */
+};
+
/* -------- start of HAB API updates ------------*/
/* The following are taken from HAB4 SIS */
HAB_CTX_MAX
};
+enum hab_target {
+ HAB_TGT_MEMORY = 0x0f,
+ HAB_TGT_PERIPHERAL = 0xf0,
+ HAB_TGT_ANY = 0x55,
+};
+
struct imx_sec_config_fuse_t {
int bank;
int word;
typedef enum hab_status hab_rvt_exit_t(void);
typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t,
void **, size_t *, hab_loader_callback_f_t);
+typedef enum hab_status hab_rvt_check_target_t(enum hab_target, const void *,
+ size_t);
+typedef void hab_rvt_failsafe_t(void);
typedef void hapi_clock_init_t(void);
#define HAB_ENG_ANY 0x00 /* Select first compatible engine */
#ifdef CONFIG_ROM_UNIFIED_SECTIONS
#define HAB_RVT_BASE 0x00000100
#else
-#define HAB_RVT_BASE 0x00000094
+#define HAB_RVT_BASE_NEW 0x00000098
+#define HAB_RVT_BASE_OLD 0x00000094
+#define HAB_RVT_BASE ((is_mx6dqp()) ? \
+ HAB_RVT_BASE_NEW : \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
+ HAB_RVT_BASE_NEW : \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
+ HAB_RVT_BASE_NEW : HAB_RVT_BASE_OLD)
#endif
#define HAB_RVT_ENTRY (*(uint32_t *)(HAB_RVT_BASE + 0x04))
#define HAB_RVT_EXIT (*(uint32_t *)(HAB_RVT_BASE + 0x08))
+#define HAB_RVT_CHECK_TARGET (*(uint32_t *)(HAB_RVT_BASE + 0x0C))
#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)(HAB_RVT_BASE + 0x10))
#define HAB_RVT_REPORT_EVENT (*(uint32_t *)(HAB_RVT_BASE + 0x20))
#define HAB_RVT_REPORT_STATUS (*(uint32_t *)(HAB_RVT_BASE + 0x24))
-
-#define HAB_RVT_REPORT_EVENT_NEW (*(uint32_t *)0x000000B8)
-#define HAB_RVT_REPORT_STATUS_NEW (*(uint32_t *)0x000000BC)
-#define HAB_RVT_AUTHENTICATE_IMAGE_NEW (*(uint32_t *)0x000000A8)
-#define HAB_RVT_ENTRY_NEW (*(uint32_t *)0x0000009C)
-#define HAB_RVT_EXIT_NEW (*(uint32_t *)0x000000A0)
+#define HAB_RVT_FAILSAFE (*(uint32_t *)(HAB_RVT_BASE + 0x28))
#define HAB_CID_ROM 0 /**< ROM Caller ID */
#define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/
+#define HAB_CMD_HDR 0xD4 /* CSF Header */
+#define HAB_CMD_WRT_DAT 0xCC /* Write Data command tag */
+#define HAB_CMD_CHK_DAT 0xCF /* Check Data command tag */
+#define HAB_CMD_SET 0xB1 /* Set command tag */
+#define HAB_PAR_MID 0x01 /* MID parameter value */
+
+#define IVT_SIZE 0x20
+#define CSF_PAD_SIZE 0x2000
+
/* ----------- end of HAB API updates ------------*/
-uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size);
+int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,
+ uint32_t ivt_offset);
+bool imx_hab_is_enabled(void);
#endif