choice
prompt "OMAP2+ platform select"
- default TARGET_BRXRE1
-
-config TARGET_BRXRE1
- bool "Support BRXRE1"
- select BOARD_LATE_INIT
-
-config TARGET_BRPPT1
- bool "Support BRPPT1"
- select BOARD_LATE_INIT
-
-config TARGET_DRACO
- bool "Support draco"
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_THUBAN
- bool "Support thuban"
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_RASTABAN
- bool "Support rastaban"
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_ETAMIN
- bool "Support etamin"
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_PXM2
- bool "Support pxm2"
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_RUT
- bool "Support rut"
- select BOARD_LATE_INIT
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_TI814X_EVM
- bool "Support ti814x_evm"
-
-config TARGET_TI816X_EVM
- bool "Support ti816x_evm"
+ default OMAP34XX
config OMAP34XX
bool "OMAP34XX SoC"
select ARM_ERRATA_621766
select ARM_ERRATA_725233
select USE_TINY_PRINTF
+ imply NAND_OMAP_GPMC
imply SPL_EXT_SUPPORT
imply SPL_FAT_SUPPORT
imply SPL_GPIO_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_NAND_SUPPORT
+ imply SPL_OMAP3_ID_NAND
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
+ imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
imply TWL4030_POWER
config OMAP44XX
bool "OMAP44XX SoC"
select USE_TINY_PRINTF
+ imply NAND_OMAP_ELM
+ imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
imply SPL_EXT_SUPPORT
imply SPL_FAT_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
+ imply SPL_NAND_SIMPLE
imply SPL_NAND_SUPPORT
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
+ imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
config OMAP54XX
bool "OMAP54XX SoC"
select ARM_ERRATA_798870
select SYS_THUMB_BUILD
+ imply NAND_OMAP_ELM
+ imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
+ imply SPL_NAND_AM33XX_BCH
+ imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_SUPPORT
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
+ imply SYS_I2C_OMAP24XX
+
+config TI814X
+ bool "TI814X SoC"
+ help
+ Support for AM335x SOC from Texas Instruments.
+ The AM335x high performance SOC features a Cortex-A8
+ ARM core and more.
+
+config TI816X
+ bool "TI816X SoC"
+ imply NAND_OMAP_ELM
+ imply NAND_OMAP_GPMC
+ help
+ Support for AM335x SOC from Texas Instruments.
+ The AM335x high performance SOC features a Cortex-A8
+ ARM core and more.
config AM43XX
bool "AM43XX SoC"
+ imply NAND_OMAP_ELM
+ imply NAND_OMAP_GPMC
imply SPL_DM
imply SPL_DM_SEQ_ALIAS
+ imply SPL_NAND_AM33XX_BCH
+ imply SPL_NAND_SUPPORT
imply SPL_OF_CONTROL
imply SPL_OF_TRANSLATE
imply SPL_SEPARATE_BSS
imply SPL_SYS_MALLOC_SIMPLE
+ imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
help
Support for AM43xx SOC from Texas Instruments.
config AM33XX
bool "AM33XX SoC"
+ imply NAND_OMAP_ELM
+ imply NAND_OMAP_GPMC
+ imply SPL_NAND_AM33XX_BCH
+ imply SPL_NAND_SUPPORT
+ imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
+ imply USE_TINY_PRINTF
help
Support for AM335x SOC from Texas Instruments.
The AM335x high performance SOC features a Cortex-A8
protocols, optional 3D graphics and an optional customer
programmable secure boot.
-config TARGET_CM_T43
- bool "Support cm_t43"
-
endchoice
+config SYS_MPUCLK
+ int "MPU CLK speed"
+ default 500
+ help
+ Defines the MPU clock speed (in MHz).
+
+config TI_SECURE_EMIF_REGION_START
+ hex "Reserved EMIF region start address"
+ depends on TI_SECURE_DEVICE
+ default 0x0
+ help
+ Reserved EMIF region start address. Set to "0" to auto-select
+ to be at the end of the external memory region.
+
+config TI_SECURE_EMIF_TOTAL_REGION_SIZE
+ hex "Reserved EMIF region size"
+ depends on TI_SECURE_DEVICE
+ default 0x0
+ help
+ Total reserved EMIF region size. Default is 0, which means no reserved EMIF
+ region on secure devices.
-config TI_SECURE_DEVICE
- bool "HS Device Type Support"
- depends on OMAP54XX || AM43XX || AM33XX || ARCH_KEYSTONE
+config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
+ hex "Size of protected region within reserved EMIF region"
+ depends on TI_SECURE_DEVICE
+ default 0x0
help
- If a high secure (HS) device type is being used, this config
- must be set. This option impacts various aspects of the
- build system (to create signed boot images that can be
- authenticated) and the code. See the doc/README.ti-secure
- file for further details.
+ This config option is used to specify the size of the portion of the total
+ reserved EMIF region set aside for secure OS needs that will be protected
+ using hardware memory firewalls. This value must be smaller than the
+ TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
source "arch/arm/mach-omap2/omap3/Kconfig"
source "board/compulab/cm_t335/Kconfig"
source "board/compulab/cm_t43/Kconfig"
+config SPL_LDSCRIPT
+ default "arch/arm/mach-omap2/u-boot-spl.lds"
+
endif
projects / people / ms / u-boot.git / blobdiff