spl: eMMC/SD: Provide one __weak spl_boot_mode() function

[people/ms/u-boot.git] / arch / arm / mach-rockchip / rk3288-board-spl.c

diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 930939ad24c4bc9a3b97850f3db32959819290ea..f3ea6242773a8872a5c67176b6655975ffcf1eb6 100644 (file)
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -8,22 +8,28 @@
 #include <debug_uart.h>
 #include <dm.h>
 #include <fdtdec.h>
+#include <i2c.h>
 #include <led.h>
 #include <malloc.h>
 #include <ram.h>
 #include <spl.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <asm/arch/bootrom.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/periph.h>
+#include <asm/arch/pmu_rk3288.h>
 #include <asm/arch/sdram.h>
+#include <asm/arch/sdram_common.h>
+#include <asm/arch/sys_proto.h>
 #include <asm/arch/timer.h>
 #include <dm/pinctrl.h>
 #include <dm/root.h>
 #include <dm/test.h>
 #include <dm/util.h>
 #include <power/regulator.h>
+#include <power/rk8xx_pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -72,51 +78,6 @@ fallback:
        return BOOT_DEVICE_MMC1;
 }
 
-u32 spl_boot_mode(const u32 boot_device)
-{
-       return MMCSD_MODE_RAW;
-}
-
-/* read L2 control register (L2CTLR) */
-static inline uint32_t read_l2ctlr(void)
-{
-       uint32_t val = 0;
-
-       asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
-
-       return val;
-}
-
-/* write L2 control register (L2CTLR) */
-static inline void write_l2ctlr(uint32_t val)
-{
-       /*
-        * Note: L2CTLR can only be written when the L2 memory system
-        * is idle, ie before the MMU is enabled.
-        */
-       asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory");
-       isb();
-}
-
-static void configure_l2ctlr(void)
-{
-       uint32_t l2ctlr;
-
-       l2ctlr = read_l2ctlr();
-       l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */
-
-       /*
-       * Data RAM write latency: 2 cycles
-       * Data RAM read latency: 2 cycles
-       * Data RAM setup latency: 1 cycle
-       * Tag RAM write latency: 1 cycle
-       * Tag RAM read latency: 1 cycle
-       * Tag RAM setup latency: 1 cycle
-       */
-       l2ctlr |= (1 << 3 | 1 << 0);
-       write_l2ctlr(l2ctlr);
-}
-
 #ifdef CONFIG_SPL_MMC_SUPPORT
 static int configure_emmc(struct udevice *pinctrl)
 {
@@ -155,7 +116,33 @@ static int configure_emmc(struct udevice *pinctrl)
        return 0;
 }
 #endif
-extern void back_to_bootrom(void);
+
+#if !defined(CONFIG_SPL_OF_PLATDATA)
+static int phycore_init(void)
+{
+       struct udevice *pmic;
+       int ret;
+
+       ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
+       if (ret)
+               return ret;
+
+#if defined(CONFIG_SPL_POWER_SUPPORT)
+       /* Increase USB input current to 2A */
+       ret = rk818_spl_configure_usb_input_current(pmic, 2000);
+       if (ret)
+               return ret;
+
+       /* Close charger when USB lower then 3.26V */
+       ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
+       if (ret)
+               return ret;
+#endif
+
+       return 0;
+}
+#endif
+
 void board_init_f(ulong dummy)
 {
        struct udevice *pinctrl;
@@ -163,7 +150,6 @@ void board_init_f(ulong dummy)
        int ret;
 
        /* Example code showing how to enable the debug UART on RK3288 */
-#ifdef EARLY_UART
 #include <asm/arch/grf_rk3288.h>
        /* Enable early UART on the RK3288 */
 #define GRF_BASE       0xff770000
@@ -182,11 +168,10 @@ void board_init_f(ulong dummy)
         * printascii("string");
         */
        debug_uart_init();
-#endif
-
-       ret = spl_init();
+       debug("\nspl:debug uart enabled in %s\n", __func__);
+       ret = spl_early_init();
        if (ret) {
-               debug("spl_init() failed: %d\n", ret);
+               debug("spl_early_init() failed: %d\n", ret);
                hang();
        }
 
@@ -205,13 +190,28 @@ void board_init_f(ulong dummy)
                return;
        }
 
+#if !defined(CONFIG_SPL_OF_PLATDATA)
+       if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
+               ret = phycore_init();
+               if (ret) {
+                       debug("Failed to set up phycore power settings: %d\n",
+                             ret);
+                       return;
+               }
+       }
+#endif
+
+#if !defined(CONFIG_SUPPORT_TPL)
+       debug("\nspl:init dram\n");
        ret = uclass_get_device(UCLASS_RAM, 0, &dev);
        if (ret) {
                debug("DRAM init failed: %d\n", ret);
                return;
        }
-#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
-       back_to_bootrom();
+#endif
+
+#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
+       back_to_bootrom(BROM_BOOT_NEXTSTAGE);
 #endif
 }
 
@@ -277,8 +277,8 @@ void spl_board_init(void)
        }
 
        preloader_console_init();
-#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
-       back_to_bootrom();
+#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)
+       back_to_bootrom(BROM_BOOT_NEXTSTAGE);
 #endif
        return;
 err:
@@ -287,3 +287,18 @@ err:
        /* No way to report error here */
        hang();
 }
+
+#ifdef CONFIG_SPL_OS_BOOT
+
+#define PMU_BASE               0xff730000
+int dram_init_banksize(void)
+{
+       struct rk3288_pmu *const pmu = (void *)PMU_BASE;
+       size_t size = rockchip_sdram_size((phys_addr_t)&pmu->sys_reg[2]);
+
+       gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+       gd->bd->bi_dram[0].size = size;
+
+       return 0;
+}
+#endif