drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / arch / arm / mach-tegra / Kconfig

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index ba0b865bb92c9bda0730128ac85edfd540faa947..5bdbc700a4b368d8e2a216601f5c742ea686ef74 100644 (file)
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,18 +1,62 @@
 if TEGRA
 
-config TEGRA_ARMV7_COMMON
-       bool "Tegra 32-bit"
-       select SUPPORT_SPL
-       select SPL
-       select OF_CONTROL
-       select SPL_DISABLE_OF_CONTROL
-       select CPU_V7
+config SPL_GPIO_SUPPORT
+       default y
+
+config SPL_LIBCOMMON_SUPPORT
+       default y
+
+config SPL_LIBGENERIC_SUPPORT
+       default y
+
+config SPL_SERIAL_SUPPORT
+       default y
+
+config TEGRA_IVC
+       bool "Tegra IVC protocol"
+       help
+         IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
+         (Inter Processor Communication) framework. Within the context of
+         U-Boot, it is typically used for communication between the main CPU
+         and various auxiliary processors.
+
+config TEGRA_COMMON
+       bool "Tegra common options"
+       select CLK
        select DM
-       select DM_SPI_FLASH
-       select DM_SERIAL
+       select DM_ETH
+       select DM_GPIO
        select DM_I2C
+       select DM_KEYBOARD
+       select DM_MMC
+       select DM_PWM
+       select DM_RESET
+       select DM_SERIAL
        select DM_SPI
-       select DM_GPIO
+       select DM_SPI_FLASH
+       select MISC
+       select OF_CONTROL
+       select VIDCONSOLE_AS_LCD if DM_VIDEO
+
+config TEGRA_NO_BPMP
+       bool "Tegra common options for SoCs without BPMP"
+       select TEGRA_CAR
+       select TEGRA_CAR_CLOCK
+       select TEGRA_CAR_RESET
+
+config TEGRA_ARMV7_COMMON
+       bool "Tegra 32-bit common options"
+       select CPU_V7
+       select SPL
+       select SUPPORT_SPL
+       select TEGRA_COMMON
+       select TEGRA_GPIO
+       select TEGRA_NO_BPMP
+
+config TEGRA_ARMV8_COMMON
+       bool "Tegra 64-bit common options"
+       select ARM64
+       select TEGRA_COMMON
 
 choice
        prompt "Tegra SoC select"
@@ -36,17 +80,36 @@ config TEGRA124
 
 config TEGRA210
        bool "Tegra210 family"
-       select OF_CONTROL
-       select ARM64
-       select DM
-       select DM_SPI_FLASH
-       select DM_SERIAL
-       select DM_I2C
-       select DM_SPI
-       select DM_GPIO
+       select TEGRA_GPIO
+       select TEGRA_ARMV8_COMMON
+       select TEGRA_NO_BPMP
+
+config TEGRA186
+       bool "Tegra186 family"
+       select DM_MAILBOX
+       select TEGRA186_BPMP
+       select TEGRA186_CLOCK
+       select TEGRA186_GPIO
+       select TEGRA186_RESET
+       select TEGRA_ARMV8_COMMON
+       select TEGRA_HSP
+       select TEGRA_IVC
 
 endchoice
 
+config TEGRA_DISCONNECT_UDC_ON_BOOT
+       bool "Disconnect USB device mode controller on boot"
+       default y
+       help
+         When loading U-Boot into RAM over USB protocols using tools such as
+         tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
+         mode controller is initialized and enumerated by the host PC running
+         the tool. Unfortunately, these tools do not shut down the USB
+         controller before executing the downloaded code, and so the host PC
+         does not "de-enumerate" the USB device. This option shuts down the
+         USB controller when U-Boot boots to avoid leaving a stale USB device
+         present.
+
 config SYS_MALLOC_F_LEN
        default 0x1800
 
@@ -55,5 +118,6 @@ source "arch/arm/mach-tegra/tegra30/Kconfig"
 source "arch/arm/mach-tegra/tegra114/Kconfig"
 source "arch/arm/mach-tegra/tegra124/Kconfig"
 source "arch/arm/mach-tegra/tegra210/Kconfig"
+source "arch/arm/mach-tegra/tegra186/Kconfig"
 
 endif