rename CFG_ macros to CONFIG_SYS

[people/ms/u-boot.git] / board / Marvell / db64460 / sdram_init.c

diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index f36f3484aba03eb9fc0f3b221df9880f9917c497..6d6b12644328e551f318f7b5052fd26614187cbb 100644 (file)
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -312,7 +312,7 @@ return 0;
        } else
                dimmInfo->slot = slot;  /* start to fill up dimminfo for this "slot" */
 
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
 
        for (i = 0; i <= 127; i++) {
                printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@ return 0;
                                                if ((dimmInfo->
                                                     minimumCycleTimeAtMaxCasLatancy_LoP
                                                     <
-                                                    CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+                                                    CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
                                                    ||
                                                    ((dimmInfo->
                                                      minimumCycleTimeAtMaxCasLatancy_LoP
                                                      ==
-                                                     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+                                                     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
                                                     && (dimmInfo->
                                                         minimumCycleTimeAtMaxCasLatancy_RoP
                                                         <
-                                                        CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+                                                        CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
                                                {
                                                        dimmInfo->
                                                                maxClSupported_DDR
@@ -714,16 +714,16 @@ return 0;
                                                if ((dimmInfo->
                                                     minimumCycleTimeAtMaxCasLatancy_LoP
                                                     >
-                                                    CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+                                                    CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
                                                    ||
                                                    ((dimmInfo->
                                                      minimumCycleTimeAtMaxCasLatancy_LoP
                                                      ==
-                                                     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+                                                     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
                                                     && (dimmInfo->
                                                         minimumCycleTimeAtMaxCasLatancy_RoP
                                                         >
-                                                        CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+                                                        CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
                                                {
                                                        printf ("*********************************************************\n");
                                                        printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1289,37 +1289,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
        case 0x0:
        case 0x80:              /* refresh period is 15.625 usec */
                sdram_config_reg =
-                       (unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+                       (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
                                        / (float) 1000000.0);
                break;
        case 0x1:
        case 0x81:              /* refresh period is 3.9 usec */
                sdram_config_reg =
-                       (unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+                       (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
                                        (float) 1000000.0);
                break;
        case 0x2:
        case 0x82:              /* refresh period is 7.8 usec */
                sdram_config_reg =
-                       (unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+                       (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
                                        (float) 1000000.0);
                break;
        case 0x3:
        case 0x83:              /* refresh period is 31.3 usec */
                sdram_config_reg =
-                       (unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+                       (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
                                        (float) 1000000.0);
                break;
        case 0x4:
        case 0x84:              /* refresh period is 62.5 usec */
                sdram_config_reg =
-                       (unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+                       (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
                                        (float) 1000000.0);
                break;
        case 0x5:
        case 0x85:              /* refresh period is 125 usec */
                sdram_config_reg =
-                       (unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+                       (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
                                        (float) 1000000.0);
                break;
        default:                /* refresh period undefined */
@@ -1816,7 +1816,7 @@ phys_size_t initdram (int board_type)
 
        printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
 
-       for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+       for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
                /* skip over banks that are not populated */
                if (!checkbank[bank_no])
                        continue;