drivers, block: remove sil680 driver

[people/ms/u-boot.git] / board / amcc / bamboo / init.S

diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
index 408450c080466458cd26608782ee8fc35bb998fe..5c7c839079e8cf1f731a380685b342f99a0f9dd2 100644 (file)
--- a/board/amcc/bamboo/init.S
+++ b/board/amcc/bamboo/init.S
@@ -4,7 +4,7 @@
  *
  *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <asm-offsets.h>
@@ -32,12 +32,7 @@ tlbtab:
         * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
         * speed up boot process. It is patched after relocation to enable SA_I
         */
-#ifndef CONFIG_NAND_SPL
        tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G)
-#else
-       tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_RWX | SA_G)
-       tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG)
-#endif
 
        /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
        tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
@@ -58,31 +53,3 @@ tlbtab:
        tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG)
 
        tlbtab_end
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-       /*
-        * For NAND booting the first TLB has to be reconfigured to full size
-        * and with caching disabled after running from RAM!
-        */
-#define TLB00  TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01  TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0)
-#define TLB02  TLB2(AC_RWX | SA_IG)
-
-       .globl  reconfig_tlb0
-reconfig_tlb0:
-       sync
-       isync
-       addi    r4,r0,0x0000            /* TLB entry #0 */
-       lis     r5,TLB00@h
-       ori     r5,r5,TLB00@l
-       tlbwe   r5,r4,0x0000            /* Save it out */
-       lis     r5,TLB01@h
-       ori     r5,r5,TLB01@l
-       tlbwe   r5,r4,0x0001            /* Save it out */
-       lis     r5,TLB02@h
-       ori     r5,r5,TLB02@l
-       tlbwe   r5,r4,0x0002            /* Save it out */
-       sync
-       isync
-       blr
-#endif