drivers, block: remove sil680 driver

[people/ms/u-boot.git] / board / amcc / common / flash.c

diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index 9aaf256c225f654b54b51122561880183001d341..4b2300b2ff955ddb339c5675a8a987bfc3892fb2 100644 (file)
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -5,23 +5,7 @@
  * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
  * Add support for Am29F016D and dynamic switch setting.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -32,7 +16,7 @@
  */
 
 #include <common.h>
-#include <ppc4xx.h>
+#include <asm/ppc4xx.h>
 #include <asm/processor.h>
 
 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];   /* info for FLASH chips */
@@ -396,7 +380,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
        volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
        volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-       int flag, prot, sect, l_sect;
+       int flag, prot, sect;
        int i;
 
        if ((s_first < 0) || (s_first > s_last)) {
@@ -427,8 +411,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
                printf("\n");
        }
 
-       l_sect = -1;
-
        /* Disable interrupts which might cause a timeout here */
        flag = disable_interrupts();
 
@@ -454,7 +436,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
                                addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
                                addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;     /* sector erase */
                        }
-                       l_sect = sect;
                        /*
                         * Wait for each sector to complete, it's more
                         * reliable.  According to AMD Spec, you must
@@ -825,7 +806,7 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
        volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
        volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-       int flag, prot, sect, l_sect;
+       int flag, prot, sect;
        int i;
 
        if ((s_first < 0) || (s_first > s_last)) {
@@ -856,8 +837,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
                printf("\n");
        }
 
-       l_sect = -1;
-
        /* Disable interrupts which might cause a timeout here */
        flag = disable_interrupts();
 
@@ -883,7 +862,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
                                addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
                                addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;     /* sector erase */
                        }
-                       l_sect = sect;
                        /*
                         * Wait for each sector to complete, it's more
                         * reliable.  According to AMD Spec, you must