Standardize command usage messages with cmd_usage()

[people/ms/u-boot.git] / board / amcc / makalu / cmd_pll.c

diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index b2666dd83b015d481da191ab31273de008700158..3b49e5b37ad989253ebfc2714abd43ecfcf68ecc 100644 (file)
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -48,7 +48,7 @@
        do {                                                            \
                int __i;                                                \
                for (__i = 0; __i < 2; __i++)                           \
-                       eeprom_write (CFG_I2C_EEPROM_ADDR,              \
+                       eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR,               \
                                      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
                                      pll_select[freq],                 \
                                      BUF_STEP + __i*BUF_STEP);         \
@@ -151,7 +151,7 @@ pll_debug(int off)
        uchar buffer[EEPROM_SDSTP_PARAM];
 
        memset(buffer, 0, sizeof(buffer));
-       eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+       eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
                    buffer, EEPROM_SDSTP_PARAM);
 
        printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
@@ -168,9 +168,9 @@ test_write(void)
        /*
         * Write twice, 8 bytes per write
         */
-       eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+       eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
                      testbuf, 8);
-       eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+       eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
                      testbuf, 16);
        printf("done\n");
 
@@ -183,7 +183,7 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        char c = '\0';
        pll_freq_t pll_freq;
        if (argc < 2) {
-               printf("Usage: \n%s\n", cmdtp->usage);
+               cmd_usage(cmdtp);
                goto ret;
        }
 
@@ -222,8 +222,8 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                goto ret;
 
        default:
-               printf("Invalid options"
-                      "\n\nUsage: \n%s\n", cmdtp->usage);
+               printf("Invalid options\n\n");
+               cmd_usage(cmdtp);
                goto ret;
        }
 
@@ -236,7 +236,7 @@ ret:
 }
 
 U_BOOT_CMD(
-       pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+       pllalter, CONFIG_SYS_MAXARGS, 1,        do_pll_alter,
        "pllalter- change pll frequence \n",
        "pllalter <selection>      - change pll frequence \n\n\
        ** New freq take effect after reset. ** \n\
@@ -294,4 +294,4 @@ U_BOOT_CMD(
        -----------------------------------------------\n"
        );
 
-#endif /* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+#endif /* CONFIG_CMD_EEPROM */