Standardize command usage messages with cmd_usage()

[people/ms/u-boot.git] / board / amcc / sequoia / cmd_sequoia.c

diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index e7997e94db739f9d93942920c5f6a33f64711a08..c840748d43ddf84696d23933c7d623bdd30bd1e8 100644 (file)
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -40,13 +40,13 @@
  * All Sequoias & Rainiers select from two possible EEPROMs in Boot
  * Config F. One for 33MHz PCI, one for 66MHz PCI. The following
  * values are for the 33MHz PCI configuration. Byte 5 (0 base) is
- * the only  value affected for a 66MHz PCI and simply needs a +0x10.
+ * the only value affected for a 33MHz PCI and simply needs a | 0x08.
  */
 
 #define NAND_COMPATIBLE        0x01
 #define NOR_COMPATIBLE  0x02
 
-/* check with Stefan on CFG_I2C_EEPROM_ADDR */
+/* check with Stefan on CONFIG_SYS_I2C_EEPROM_ADDR */
 #define I2C_EEPROM_ADDR 0x52
 
 static char *config_labels[] = {
@@ -57,6 +57,7 @@ static char *config_labels[] = {
        "CPU: 416 PLB: 166 OPB: 83 EBC: 55",
        "CPU: 500 PLB: 166 OPB: 83 EBC: 55",
        "CPU: 533 PLB: 133 OPB: 66 EBC: 66",
+       "CPU: 667 PLB: 133 OPB: 66 EBC: 66",
        "CPU: 667 PLB: 166 OPB: 83 EBC: 55",
        NULL
 };
@@ -97,6 +98,11 @@ static u8 boot_configs[][17] = {
                0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40,
                0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
        },
+       {
+               (NOR_COMPATIBLE),
+               0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30, 0x40,
+               0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+       },
        {
                (NAND_COMPATIBLE | NOR_COMPATIBLE),
                0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40,
@@ -122,7 +128,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        extern char console_buffer[];
 
        if (argc < 2) {
-               printf("Usage:\n%s\n", cmdtp->usage);
+               cmd_usage(cmdtp);
                return 1;
        }
 
@@ -201,7 +207,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        }
 
        /* check CPLD register +5 for PCI 66MHz flag */
-       if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0)
+       if ((in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & CONFIG_SYS_BCSR5_PCI66EN) == 0)
                /*
                 * PLB-to-PCI divisor = 3 for 33MHz sync PCI
                 * instead of 2 for 66MHz systems
@@ -210,7 +216,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
        if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
                printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
-       udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+       udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 
        printf("Done\n");
        printf("Please power-cycle the board for the changes to take effect\n");