omap3: cm-t3517: add USB support

[people/ms/u-boot.git] / board / compulab / cm_t3517 / mux.c

diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c
index f799d211c4cd512e61e81d4d3435496380a21964..e1575a61bdfb60a313ef8d4f7734c1a2b30b721b 100644 (file)
--- a/board/compulab/cm_t3517/mux.c
+++ b/board/compulab/cm_t3517/mux.c
@@ -104,6 +104,10 @@ void set_muxconf_regs(void)
        MUX_VAL(CP(UART2_CTS),          (IEN  | PTU | EN  | M4)); /*GPIO_144*/
        /* WIFI nRESET GPIO145 */
        MUX_VAL(CP(UART2_RTS),          (IEN  | PTD | EN  | M4)); /*GPIO_145*/
+       /* USB1 PHY Reset GPIO 146 */
+       MUX_VAL(CP(UART2_TX),           (IEN  | PTD | EN  | M4)); /*GPIO_146*/
+       /* USB2 PHY Reset GPIO 147 */
+       MUX_VAL(CP(UART2_RX),           (IEN  | PTD | EN  | M4)); /*GPIO_147*/
 
        /* MMC1 */
        MUX_VAL(CP(MMC1_CLK),           (IDIS | PTU | EN  | M0));
@@ -119,12 +123,46 @@ void set_muxconf_regs(void)
        MUX_VAL(CP(I2C3_SCL),           (IEN  | PTU | EN  | M0));
        MUX_VAL(CP(I2C3_SDA),           (IEN  | PTU | EN  | M0));
 
+       /* SB-T35 USB HUB Reset GPIO98 */
+       MUX_VAL(CP(CCDC_WEN),           (IDIS | PTU | EN  | M4)); /*GPIO_98*/
+       /* CM-T3517 USB HUB Reset GPIO152 */
+       MUX_VAL(CP(MCBSP4_CLKX),        (IDIS | PTD | DIS | M4)); /*GPIO_152*/
+
        /* Green LED GPIO186 */
        MUX_VAL(CP(SYS_CLKOUT2),        (IDIS | PTU | DIS | M4)); /*GPIO_186*/
 
        /* RTC V3020 CS Enable GPIO160 */
        MUX_VAL(CP(MCBSP_CLKS),         (IEN  | PTD | EN  | M4)); /*GPIO_160*/
 
+       /* USB0 - mUSB */
+       MUX_VAL(CP(USB0_DRVBUS),        (IEN  | PTD | EN  | M0));
+       /* USB1 EHCI */
+       MUX_VAL(CP(ETK_D0_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT0*/
+       MUX_VAL(CP(ETK_D1_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT1*/
+       MUX_VAL(CP(ETK_D2_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT2*/
+       MUX_VAL(CP(ETK_D7_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT3*/
+       MUX_VAL(CP(ETK_D4_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT4*/
+       MUX_VAL(CP(ETK_D5_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT5*/
+       MUX_VAL(CP(ETK_D6_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT6*/
+       MUX_VAL(CP(ETK_D3_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DT7*/
+       MUX_VAL(CP(ETK_D8_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_DIR*/
+       MUX_VAL(CP(ETK_D9_ES2),         (IEN  | PTD | EN  | M3)); /*HSUSB1_NXT*/
+       MUX_VAL(CP(ETK_CTL_ES2),        (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
+       MUX_VAL(CP(ETK_CLK_ES2),        (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
+       /* USB2 EHCI */
+       MUX_VAL(CP(ETK_D14_ES2),        (IEN  | PTD | EN  | M3)); /*HSUSB2_DT0*/
+       MUX_VAL(CP(ETK_D15_ES2),        (IEN  | PTD | EN  | M3)); /*HSUSB2_DT1*/
+       MUX_VAL(CP(MCSPI1_CS3),         (IEN  | PTD | EN  | M3)); /*HSUSB2_DT2*/
+       MUX_VAL(CP(MCSPI2_CS1),         (IEN  | PTD | EN  | M3)); /*HSUSB2_DT3*/
+       MUX_VAL(CP(MCSPI2_SIMO),        (IEN  | PTD | EN  | M3)); /*HSUSB2_DT4*/
+       MUX_VAL(CP(MCSPI2_SOMI),        (IEN  | PTD | EN  | M3)); /*HSUSB2_DT5*/
+       MUX_VAL(CP(MCSPI2_CS0),         (IEN  | PTD | EN  | M3)); /*HSUSB2_DT6*/
+       MUX_VAL(CP(MCSPI2_CLK),         (IEN  | PTD | EN  | M3)); /*HSUSB2_DT7*/
+       MUX_VAL(CP(ETK_D12_ES2),        (IEN  | PTD | EN  | M3)); /*HSUSB2_DIR*/
+       MUX_VAL(CP(ETK_D13_ES2),        (IEN  | PTD | EN  | M3)); /*HSUSB2_NXT*/
+       MUX_VAL(CP(ETK_D10_ES2),        (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
+       MUX_VAL(CP(ETK_D11_ES2),        (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
+
        /* SYS_BOOT */
        MUX_VAL(CP(SYS_BOOT0),          (IEN  | PTU | DIS | M4)); /*GPIO_2*/
        MUX_VAL(CP(SYS_BOOT1),          (IEN  | PTU | DIS | M4)); /*GPIO_3*/