Add GPL-2.0+ SPDX-License-Identifier to source files

[people/ms/u-boot.git] / board / denx / m28evk / spl_boot.c

diff --git a/board/denx/m28evk/spl_boot.c b/board/denx/m28evk/spl_boot.c
index a04fe180c138c951d74b42a6ebcded42f826d73c..525ba6ae7539c0906d9f9e65450d2c19e1f9c41c 100644 (file)
--- a/board/denx/m28evk/spl_boot.c
+++ b/board/denx/m28evk/spl_boot.c
@@ -4,23 +4,7 @@
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -109,8 +93,9 @@ const iomux_cfg_t iomux_setup[] = {
                (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
        MX28_PAD_SSP0_SCK__SSP0_SCK |
                (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
-       MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0,     /* Power .. FIXME */
-       MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP ... FIXME */
+       MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
+               (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),  /* Power */
+       MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP */
 
        /* GPMI NAND */
        MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
@@ -147,6 +132,9 @@ const iomux_cfg_t iomux_setup[] = {
        MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
        MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
        MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
+#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
+       MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */
+#endif
 
        /* I2C */
        MX28_PAD_I2C0_SCL__I2C0_SCL,
@@ -214,5 +202,5 @@ const iomux_cfg_t iomux_setup[] = {
 
 void board_init_ll(void)
 {
-       mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
+       mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
 }