* Code cleanup:

[people/ms/u-boot.git] / board / spd8xx / spd8xx.c

diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c
index 64288968aab70241a191885bcb1d240c7f49b2f2..61201d7ad0c6584bb8c459d1ef55f45b3178ec1e 100644 (file)
--- a/board/spd8xx/spd8xx.c
+++ b/board/spd8xx/spd8xx.c
@@ -41,7 +41,7 @@ const uint sharc_table[] =
         */
        0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04,
        0xFFFFEC05, /* last */
-                   _NOT_USED_, _NOT_USED_, _NOT_USED_,
+                   _NOT_USED_, _NOT_USED_, _NOT_USED_,
        /*
         * Burst Read. (Offset 8 in UPM RAM)
         */
@@ -55,7 +55,7 @@ const uint sharc_table[] =
         */
        0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04,
        0xFFFFEC05, /* last */
-                   _NOT_USED_, _NOT_USED_, _NOT_USED_,
+                   _NOT_USED_, _NOT_USED_, _NOT_USED_,
        /*
         * Burst Write. (Offset 20 in UPM RAM)
         */
@@ -89,9 +89,9 @@ const uint sdram_table[] =
        /*
         * SDRAM Initialization (offset 5 in UPM RAM)
         *
-         * This is no UPM entry point. The following definition uses
-         * the remaining space to establish an initialization
-         * sequence, which is executed by a RUN command.
+        * This is no UPM entry point. The following definition uses
+        * the remaining space to establish an initialization
+        * sequence, which is executed by a RUN command.
         *
         */
                    0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
@@ -282,8 +282,8 @@ void        reset_phy(void)
        immr->im_ioport.iop_padat &= ~(PA_ENET_MDC);    /* set MDC = 0 */
 
        /*
-         * RESET in implemented by a positive pulse of at least 1 us
-         * at the reset pin.
+        * RESET in implemented by a positive pulse of at least 1 us
+        * at the reset pin.
         *
         * Configure RESET pins for NS DP83843 PHY, and RESET chip.
         *