]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - board/total5200/sdram.c
mpc5xxx: Remove all references to MGT5100
[people/ms/u-boot.git] / board / total5200 / sdram.c
index dc4c6f18c2d8c40e0e14d0650f4826cb6b7c76a0..d883eb656da1acd1e61d4c389230c9363d049684 100644 (file)
@@ -76,7 +76,6 @@ static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
  *            is something else than 0x00000000.
  */
 
-#if defined(CONFIG_MPC5200)
 long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 {
        ulong dramsize = 0;
@@ -174,54 +173,3 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 
        return dramsize + dramsize2;
 }
-
-#elif defined(CONFIG_MGT5100)
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
-       ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-       ulong test1, test2;
-
-       /* setup and enable SDRAM chip selects */
-       *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-       *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-       *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-       __asm__ volatile ("sync");
-
-       /* setup config registers */
-       *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
-       *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
-
-       /* address select register */
-       *(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel;
-       __asm__ volatile ("sync");
-
-       /* find RAM size */
-       mpc5xxx_sdram_start(sdram_conf, 0);
-       test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-       mpc5xxx_sdram_start(sdram_conf, 1);
-       test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-       if (test1 > test2) {
-               mpc5xxx_sdram_start(sdram_conf, 0);
-               dramsize = test1;
-       } else {
-               dramsize = test2;
-       }
-
-       /* set SDRAM end address according to size */
-       *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-       /* Retrieve amount of SDRAM available */
-       dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-       return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif