Check if a variable is defined in the environment for use in
shell scripting.
+config CMD_ENV_CALLBACK
+ bool "env callbacks - print callbacks and their associated variables"
+ help
+ Some environment variable have callbacks defined by
+ U_BOOT_ENV_CALLBACK. These are called when the variable changes.
+ For example changing "baudrate" adjust the serial baud rate. This
+ command lists the currently defined callbacks.
+
+config CMD_ENV_FLAGS
+ bool "env flags -print variables that have non-default flags"
+ help
+ Some environment variables have special flags that control their
+ behaviour. For example, serial# can only be written once and cannot
+ be deleted. This command shows the variables that have special
+ flags.
+
endmenu
menu "Memory commands"
config CMD_CRC32
bool "crc32"
+ select HASH
default y
help
Compute CRC32.
+config CMD_EEPROM
+ bool "eeprom - EEPROM subsystem"
+ help
+ (deprecated, needs conversion to driver model)
+ Provides commands to read and write EEPROM (Electrically Erasable
+ Programmable Read Only Memory) chips that are connected over an
+ I2C bus.
+
+config CMD_EEPROM_LAYOUT
+ bool "Enable layout-aware eeprom commands"
+ depends on CMD_EEPROM
+ help
+ (deprecated, needs conversion to driver model)
+ When enabled, additional eeprom sub-commands become available.
+
+ eeprom print - prints the contents of the eeprom in a human-readable
+ way (eeprom layout fields, and data formatted to be fit for human
+ consumption).
+
+ eeprom update - allows user to update eeprom fields by specifying
+ the field name, and providing the new data in a human readable format
+ (same format as displayed by the eeprom print command).
+
+ Both commands can either auto detect the layout, or be told which
+ layout to use.
+
+ Feature API:
+ __weak int parse_layout_version(char *str)
+ - override to provide your own layout name parsing
+ __weak void __eeprom_layout_assign(struct eeprom_layout *layout,
+ int layout_version);
+ - override to setup the layout metadata based on the version
+ __weak int eeprom_layout_detect(unsigned char *data)
+ - override to provide your own algorithm for detecting layout
+ version
+ eeprom_field.c
+ - contains various printing and updating functions for common
+ types of eeprom fields. Can be used for defining
+ custom layouts.
+
+config EEPROM_LAYOUT_HELP_STRING
+ string "Tells user what layout names are supported"
+ depends on CMD_EEPROM_LAYOUT
+ default "<not defined>"
+ help
+ Help printed with the LAYOUT VERSIONS part of the 'eeprom'
+ command's help.
+
config CMD_MD5SUM
bool "md5sum"
default n
option is to use sandbox and pass the -d point to sandbox's
u-boot.dtb file.
+config CMD_IDE
+ bool "ide - Support for IDE drivers"
+ select IDE
+ help
+ Provides an 'ide' command which allows accessing the IDE drive,
+ reseting the IDE interface, printing the partition table and
+ geting device info. It also enables the 'diskboot' command which
+ permits booting from an IDE drive.
+
+config CMD_IO
+ bool "io - Support for performing I/O accesses"
+ help
+ Provides an 'iod' command to display I/O space and an 'iow' command
+ to write values to the I/O space. This can be useful for manually
+ checking the state of devices during boot when debugging device
+ drivers, etc.
+
+config CMD_IOTRACE
+ bool "iotrace - Support for tracing I/O activity"
+ help
+ Provides an 'iotrace' command which supports recording I/O reads and
+ writes in a trace buffer in memory . It also maintains a checksum
+ of the trace records (even if space is exhausted) so that the
+ sequence of I/O accesses can be verified.
+
+ When debugging drivers it is useful to see what I/O accesses were
+ done and in what order.
+
+ Even if the individual accesses are of little interest it can be
+ useful to verify that the access pattern is consistent each time
+ an operation is performed. In this case a checksum can be used to
+ characterise the operation of a driver. The checksum can be compared
+ across different runs of the operation to verify that the driver is
+ working properly.
+
+ In particular, when performing major refactoring of the driver, where
+ the access pattern should not change, the checksum provides assurance
+ that the refactoring work has not broken the driver.
+
+ This works by sneaking into the io.h heder for an architecture and
+ redirecting I/O accesses through iotrace's tracing mechanism.
+
+ For now no commands are provided to examine the trace buffer. The
+ format is fairly simple, so 'md' is a reasonable substitute.
+
+ Note: The checksum feature is only useful for I/O regions where the
+ contents do not change outside of software control. Where this is not
+ suitable you can fall back to manually comparing the addresses. It
+ might be useful to enhance tracing to only checksum the accesses and
+ not the data read/written.
+
config CMD_LOADB
bool "loadb"
default y
help
FPGA support.
+config CMD_FPGA_LOADBP
+ bool "fpga loadbp - load partial bitstream (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGA_LOADFS
+ bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+ bool "fpga loadmk - load bitstream from image"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+ bool "fpga loadp - load partial bitstream"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGAD
+ bool "fpgad - dump FPGA registers"
+ help
+ (legacy, needs conversion to driver model)
+ Provides a way to dump FPGA registers by calling the board-specific
+ fpga_get_reg() function. This functions similarly to the 'md'
+ command.
+
+config CMD_FUSE
+ bool "fuse - support for the fuse subssystem"
+ help
+ (deprecated - needs conversion to driver model)
+ This allows reading, sensing, programming or overriding fuses
+ which control the behaviour of the device. The command uses the
+ fuse_...() API.
+
config CMD_REMOTEPROC
bool "remoteproc"
depends on REMOTEPROC
help
GPIO support.
+config CMD_FDC
+ bool "fdcboot - Boot from floppy device"
+ help
+ The 'fdtboot' command allows booting an image from a floppy disk.
+
endmenu
help
Acquire a network IP address using the link-local protocol
+config CMD_ETHSW
+ bool "ethsw"
+ help
+ Allow control of L2 Ethernet switch commands. These are supported
+ by the vsc9953 Ethernet driver at present. Sub-commands allow
+ operations such as enabling / disabling a port and
+ viewing/maintaining the filtering database (FDB)
+
endmenu
menu "Misc commands"
help
Enable the "icache" and "dcache" commands
+config CMD_DISPLAY
+ bool "Enable the 'display' command, for character displays"
+ help
+ (this needs porting to driver model)
+ This enables the 'display' command which allows a string to be
+ displayed on a simple board-specific display. Implement
+ display_putc() to use it.
+
config CMD_LED
bool "led"
default y if LED
with led on/off/togle/blink. Any LED drivers can be controlled with
this command, e.g. led_gpio.
+config CMD_DATE
+ bool "date"
+ default y if DM_RTC
+ help
+ Enable the 'date' command for getting/setting the time/date in RTC
+ devices.
+
config CMD_TIME
bool "time"
help
Run commands and summarize execution time.
+config CMD_GETTIME
+ bool "gettime - read elapsed time"
+ help
+ Enable the 'gettime' command which reads the elapsed time since
+ U-Boot started running. This shows the time in seconds and
+ milliseconds. See also the 'bootstage' command which provides more
+ flexibility for boot timing.
+
# TODO: rename to CMD_SLEEP
config CMD_MISC
bool "sleep"
generation/use as key for cryptographic operation. Key
modifier should be 16 byte long.
+config CMD_HASH
+ bool "Support 'hash' command"
+ select HASH
+ help
+ This provides a way to hash data in memory using various supported
+ algorithms (such as SHA1, MD5, CRC32). The computed digest can be
+ saved to memory or to an environment variable. It is also possible
+ to verify a hash against data in memory.
+
config CMD_TPM
bool "Enable the 'tpm' command"
depends on TPM
U-Boot to actually boot the Operating System. Available commands are
cbfsinit, cbfsinfo, cbfsls and cbfsload.
+config CMD_CRAMFS
+ bool "Enable the 'cramfs' command"
+ depends on FS_CRAMFS
+ help
+ This provides commands for dealing with CRAMFS (Compressed ROM
+ filesystem). CRAMFS is useful when space is tight since files are
+ compressed. Two commands are provided:
+
+ cramfsls - lists files in a cramfs image
+ cramfsload - loads a file from a cramfs image
+
config CMD_EXT2
bool "ext2 command support"
help
help
Enables fsuuid command for filesystem UUID.
+config CMD_JFFS2
+ bool "jffs2 command"
+ help
+ Enables commands to support the JFFS2 (Journalling Flash File System
+ version 2) filesystem. This enables fsload, ls and fsinfo which
+ provide the ability to load files, list directories and obtain
+ filesystem information.
+
config CMD_MTDPARTS
depends on ARCH_SUNXI
bool "MTD partition support"
for some PowerPC processors. For details please see the
docuemntation in doc/README.beddbug
+config CMD_DIAG
+ bool "diag - Board diagnostics"
+ help
+ This command provides access to board diagnostic tests. These are
+ called Power-on Self Tests (POST). The command allows listing of
+ available tests and running either all the tests, or specific tests
+ identified by name.
+
endmenu
config CMD_UBI
projects / people / ms / u-boot.git / blobdiff