Merge branch 'master' of git://git.denx.de/u-boot-tegra

[people/ms/u-boot.git] / common / board_f.c

diff --git a/common/board_f.c b/common/board_f.c
index 62fdaebb54157a9bf730815cb26fa3a5a89585cf..731b539eaabe8bc1c14e5bae69b75c0dd82957c1 100644 (file)
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -174,7 +174,7 @@ static int announce_dram_init(void)
        return 0;
 }
 
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
+#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K)
 static int init_func_ram(void)
 {
 #ifdef CONFIG_BOARD_TYPES
@@ -610,7 +610,7 @@ static int display_new_sp(void)
        return 0;
 }
 
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
 static int setup_board_part1(void)
 {
        bd_t *bd = gd->bd;
@@ -631,7 +631,7 @@ static int setup_board_part1(void)
                defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
        bd->bi_immr_base = CONFIG_SYS_IMMR;     /* base  of IMMR register     */
 #endif
-#if defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K)
        bd->bi_mbar_base = CONFIG_SYS_MBAR;     /* base of internal registers */
 #endif
 #if defined(CONFIG_MPC83xx)
@@ -660,6 +660,14 @@ static int setup_board_part2(void)
        bd->bi_ipbfreq = gd->arch.ipb_clk;
        bd->bi_pcifreq = gd->pci_clk;
 #endif /* CONFIG_MPC5xxx */
+#if defined(CONFIG_M68K) && defined(CONFIG_PCI)
+       bd->bi_pcifreq = gd->pci_clk;
+#endif
+#if defined(CONFIG_EXTRA_CLOCK)
+       bd->bi_inpfreq = gd->arch.inp_clk;      /* input Freq in Hz */
+       bd->bi_vcofreq = gd->arch.vco_clk;      /* vco Freq in Hz */
+       bd->bi_flbfreq = gd->arch.flb_clk;      /* flexbus Freq in Hz */
+#endif
 
        return 0;
 }
@@ -721,6 +729,13 @@ static int setup_reloc(void)
 {
 #ifdef CONFIG_SYS_TEXT_BASE
        gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
+#ifdef CONFIG_M68K
+       /*
+        * On all ColdFire arch cpu, monitor code starts always
+        * just after the default vector table location, so at 0x400
+        */
+       gd->reloc_off = gd->relocaddr - (CONFIG_SYS_TEXT_BASE + 0x400);
+#endif
 #endif
        memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
 
@@ -845,6 +860,9 @@ static init_fnc_t init_sequence_f[] = {
 #endif
 #ifdef CONFIG_FSL_ESDHC
        get_clocks,
+#endif
+#ifdef CONFIG_M68K
+       get_clocks,
 #endif
        env_init,               /* initialize environment */
 #if defined(CONFIG_8xx_CPUCLK_DEFAULT)
@@ -872,7 +890,7 @@ static init_fnc_t init_sequence_f[] = {
 #if defined(CONFIG_MPC83xx)
        prt_83xx_rsr,
 #endif
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
        checkcpu,
 #endif
        print_cpuinfo,          /* display cpu info (and speed) */
@@ -898,7 +916,7 @@ static init_fnc_t init_sequence_f[] = {
 #if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32)
        dram_init,              /* configure available RAM banks */
 #endif
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
+#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K)
        init_func_ram,
 #endif
 #ifdef CONFIG_POST
@@ -966,7 +984,7 @@ static init_fnc_t init_sequence_f[] = {
        reserve_stacks,
        setup_dram_config,
        show_dram_config,
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
        setup_board_part1,
        INIT_FUNC_WATCHDOG_RESET
        setup_board_part2,
@@ -1056,7 +1074,7 @@ void board_init_f_r(void)
         * Transfer execution from Flash to RAM by calculating the address
         * of the in-RAM copy of board_init_r() and calling it
         */
-       (board_init_r + gd->reloc_off)(gd, gd->relocaddr);
+       (board_init_r + gd->reloc_off)((gd_t *)gd, gd->relocaddr);
 
        /* NOTREACHED - board_init_r() does not return */
        hang();