#include <jffs2/jffs2.h>
#include <nand.h>
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
+#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
/* parition handling routines */
int mtdparts_init(void);
arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, size_t *size)
{
int idx = nand_curr_device;
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
+#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
struct mtd_device *dev;
struct part_info *part;
u8 pnum;
*size = nand->size - *off;
}
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
+#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
out:
#endif
printf("device %d ", idx);
if (*size == nand->size)
puts("whole chip\n");
else
- printf("offset 0x%lx, size 0x%x\n", *off, *size);
+ printf("offset 0x%lx, size 0x%zx\n", *off, *size);
return 0;
}
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
+static void print_status(ulong start, ulong end, ulong erasesize, int status)
+{
+ printf("%08lx - %08lx: %08lx blocks %s%s%s\n",
+ start,
+ end - 1,
+ (end - start) / erasesize,
+ ((status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
+ ((status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
+ ((status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
+}
+
+static void do_nand_status(nand_info_t *nand)
+{
+ ulong block_start = 0;
+ ulong off;
+ int last_status = -1;
+
+ struct nand_chip *nand_chip = nand->priv;
+ /* check the WP bit */
+ nand_chip->cmdfunc(nand, NAND_CMD_STATUS, -1, -1);
+ printf("device is %swrite protected\n",
+ (nand_chip->read_byte(nand) & 0x80 ?
+ "NOT " : ""));
+
+ for (off = 0; off < nand->size; off += nand->erasesize) {
+ int s = nand_get_lock_status(nand, off);
+
+ /* print message only if status has changed */
+ if (s != last_status && off != 0) {
+ print_status(block_start, off, nand->erasesize,
+ last_status);
+ block_start = off;
+ }
+ last_status = s;
+ }
+ /* Print the last block info */
+ print_status(block_start, off, nand->erasesize, last_status);
+}
+#endif
+
int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int i, dev, ret = 0;
size_t size;
char *cmd, *s;
nand_info_t *nand;
-#ifdef CFG_NAND_QUIET
- int quiet = CFG_NAND_QUIET;
+#ifdef CONFIG_SYS_NAND_QUIET
+ int quiet = CONFIG_SYS_NAND_QUIET;
#else
int quiet = 0;
#endif
if (strcmp(cmd, "info") == 0) {
putc('\n');
- for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
if (nand_info[i].name)
printf("Device %d: %s, sector size %u KiB\n",
i, nand_info[i].name,
if (argc < 3) {
if ((nand_curr_device < 0) ||
- (nand_curr_device >= CFG_MAX_NAND_DEVICE))
+ (nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE))
puts("\nno devices available\n");
else
printf("\nDevice %d: %s\n", nand_curr_device,
return 0;
}
dev = (int)simple_strtoul(argv[2], NULL, 10);
- if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev].name) {
puts("No such device\n");
return 1;
}
puts("... is now current device\n");
nand_curr_device = dev;
-#ifdef CFG_NAND_SELECT_DEVICE
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
/*
* Select the chip in the board/cpu specific driver
*/
goto usage;
/* the following commands operate on the current device */
- if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE ||
+ if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
puts("\nno devices available\n");
return 1;
return 1;
}
- printf(" %d bytes %s: %s\n", size,
+ printf(" %zu bytes %s: %s\n", size,
read ? "read" : "written", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
return 1;
}
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
if (strcmp(cmd, "lock") == 0) {
- int tight = 0;
+ int tight = 0;
int status = 0;
if (argc == 3) {
if (!strcmp("tight", argv[2]))
if (!strcmp("status", argv[2]))
status = 1;
}
-/*
- * ! BROKEN !
- *
- * TODO: must be implemented and tested by someone with HW
- */
-#if 0
if (status) {
- ulong block_start = 0;
- ulong off;
- int last_status = -1;
-
- struct nand_chip *nand_chip = nand->priv;
- /* check the WP bit */
- nand_chip->cmdfunc (nand, NAND_CMD_STATUS, -1, -1);
- printf("device is %swrite protected\n",
- (nand_chip->read_byte(nand) & 0x80 ?
- "NOT " : ""));
-
- for (off = 0; off < nand->size; off += nand->writesize) {
- int s = nand_get_lock_status(nand, off);
-
- /* print message only if status has changed
- * or at end of chip
- */
- if (off == nand->size - nand->writesize
- || (s != last_status && off != 0)) {
-
- printf("%08lx - %08lx: %8d pages %s%s%s\n",
- block_start,
- off-1,
- (off-block_start)/nand->writesize,
- ((last_status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
- ((last_status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
- ((last_status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
- }
-
- last_status = s;
- }
+ do_nand_status(nand);
} else {
if (!nand_lock(nand, tight)) {
puts("NAND flash successfully locked\n");
return 1;
}
}
-#endif
return 0;
}
if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
return 1;
-/*
- * ! BROKEN !
- *
- * TODO: must be implemented and tested by someone with HW
- */
-#if 0
if (!nand_unlock(nand, off, size)) {
puts("NAND flash successfully unlocked\n");
} else {
"write and erase will probably fail\n");
return 1;
}
-#endif
return 0;
}
+#endif
usage:
- printf("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
U_BOOT_CMD(nand, 5, 1, do_nand,
- "nand - NAND sub-system\n",
+ "NAND sub-system",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read - addr off|partition size\n"
"nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
"nand markbad off - mark bad block at offset (UNSAFE)\n"
"nand biterr off - make a bit error at offset (UNSAFE)\n"
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
"nand lock [tight] [status]\n"
" bring nand to lock state or display locked pages\n"
- "nand unlock [offset] [size] - unlock section\n");
+ "nand unlock [offset] [size] - unlock section\n"
+#endif
+);
static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
ulong offset, ulong addr, char *cmd)
s = strchr(cmd, '.');
if (s != NULL &&
- (strcmp(s, ".jffs2") && !strcmp(s, ".e") && !strcmp(s, ".i"))) {
+ (strcmp(s, ".jffs2") && strcmp(s, ".e") && strcmp(s, ".i"))) {
printf("Unknown nand load suffix '%s'\n", s);
show_boot_progress(-53);
return 1;
printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
cnt = nand->writesize;
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
+ r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
show_boot_progress (-56);
}
show_boot_progress (57);
- /* FIXME: skip bad blocks */
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
+ r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
show_boot_progress (-58);
char *boot_device = NULL;
int idx;
ulong addr, offset = 0;
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
+#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
struct mtd_device *dev;
struct part_info *part;
u8 pnum;
if (argc == 3)
addr = simple_strtoul(argv[1], NULL, 16);
else
- addr = CFG_LOAD_ADDR;
+ addr = CONFIG_SYS_LOAD_ADDR;
return nand_load_image(cmdtp, &nand_info[dev->id->num],
part->offset, addr, argv[0]);
}
show_boot_progress(52);
switch (argc) {
case 1:
- addr = CFG_LOAD_ADDR;
+ addr = CONFIG_SYS_LOAD_ADDR;
boot_device = getenv("bootdevice");
break;
case 2:
offset = simple_strtoul(argv[3], NULL, 16);
break;
default:
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
+#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
usage:
#endif
- printf("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
show_boot_progress(-53);
return 1;
}
idx = simple_strtoul(boot_device, NULL, 16);
- if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) {
+ if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx].name) {
printf("\n** Device %d not available\n", idx);
show_boot_progress(-55);
return 1;
}
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
- "nboot - boot from NAND device\n",
+ "boot from NAND device",
"[partition] | [[[loadAddr] dev] offset]\n");
#endif
/*
* Imports from nand_legacy.c
*/
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
extern int curr_device;
extern int nand_legacy_erase(struct nand_chip *nand, size_t ofs,
size_t len, int clean);
switch (argc) {
case 0:
case 1:
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
case 2:
if (strcmp (argv[1], "info") == 0) {
putc ('\n');
- for (i = 0; i < CFG_MAX_NAND_DEVICE; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; ++i) {
if (nand_dev_desc[i].ChipID ==
NAND_ChipID_UNKNOWN)
continue; /* list only known devices */
} else if (strcmp (argv[1], "device") == 0) {
if ((curr_device < 0)
- || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+ || (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
puts ("\nno devices available\n");
return 1;
}
} else if (strcmp (argv[1], "bad") == 0) {
if ((curr_device < 0)
- || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+ || (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
puts ("\nno devices available\n");
return 1;
}
return 0;
}
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
case 3:
if (strcmp (argv[1], "device") == 0) {
int dev = (int) simple_strtoul (argv[2], NULL, 10);
printf ("\nDevice %d: ", dev);
- if (dev >= CFG_MAX_NAND_DEVICE) {
+ if (dev >= CONFIG_SYS_MAX_NAND_DEVICE) {
puts ("unknown device\n");
return 1;
}
return ret;
}
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
default:
/* at least 4 args */
(u_char *) addr);
}
return ret;
- } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
- cmd |= NANDRW_JFFS2; /* skip bad blocks */
- else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) {
+ } else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 7)) {
cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
if (cmd & NANDRW_READ)
cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
- }
+ } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
+ cmd |= NANDRW_JFFS2; /* skip bad blocks */
#ifdef SXNI855T
/* need ".e" same as ".j" for compatibility with older units */
else if (cmdtail && !strcmp (cmdtail, ".e"))
cmd |= NANDRW_JFFS2; /* skip bad blocks */
#endif
-#ifdef CFG_NAND_SKIP_BAD_DOT_I
+#ifdef CONFIG_SYS_NAND_SKIP_BAD_DOT_I
/* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
/* ".i" for image -> read skips bad block (no 0xff) */
else if (cmdtail && !strcmp (cmdtail, ".i")) {
if (cmd & NANDRW_READ)
cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
}
-#endif /* CFG_NAND_SKIP_BAD_DOT_I */
+#endif /* CONFIG_SYS_NAND_SKIP_BAD_DOT_I */
else if (cmdtail) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
return ret;
} else {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
rcode = 1;
}
U_BOOT_CMD(
nand, 5, 1, do_nand,
- "nand - legacy NAND sub-system\n",
+ "legacy NAND sub-system",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read[.jffs2[s]] addr off size\n"
show_boot_progress (52);
switch (argc) {
case 1:
- addr = CFG_LOAD_ADDR;
+ addr = CONFIG_SYS_LOAD_ADDR;
boot_device = getenv ("bootdevice");
break;
case 2:
offset = simple_strtoul(argv[3], NULL, 16);
break;
default:
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
show_boot_progress (-53);
return 1;
}
dev = simple_strtoul(boot_device, &ep, 16);
- if ((dev >= CFG_MAX_NAND_DEVICE) ||
+ if ((dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
(nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
printf ("\n** Device %d not available\n", dev);
show_boot_progress (-55);
U_BOOT_CMD(
nboot, 4, 1, do_nandboot,
- "nboot - boot from NAND device\n",
+ "boot from NAND device",
"loadAddr dev\n"
);
projects / people / ms / u-boot.git / blobdiff