#include <asm/processor.h>
#include <asm/unaligned.h>
#include <linux/ctype.h>
+#include <linux/list.h>
#include <asm/byteorder.h>
#ifdef CONFIG_SANDBOX
#include <asm/state.h>
#endif
#include <asm/unaligned.h>
-#include <dm/root.h>
DECLARE_GLOBAL_DATA_PTR;
#include <usb.h>
-#ifdef CONFIG_4xx
-#include <asm/4xx_pci.h>
-#endif
#define USB_BUFSIZ 512
#define HUB_SHORT_RESET_TIME 20
#define HUB_LONG_RESET_TIME 200
+#define PORT_OVERCURRENT_MAX_SCAN_COUNT 3
+
+struct usb_device_scan {
+ struct usb_device *dev; /* USB hub device to scan */
+ struct usb_hub_device *hub; /* USB hub struct */
+ int port; /* USB port to scan */
+ struct list_head list;
+};
+
/* TODO(sjg@chromium.org): Remove this when CONFIG_DM_USB is defined */
static struct usb_hub_device hub_dev[USB_MAX_HUB];
static int usb_hub_index;
+static LIST_HEAD(usb_scan_list);
__weak void usb_hub_reset_devices(int port)
{
debug("port %d returns %lX\n", i + 1, dev->status);
}
+#ifdef CONFIG_SANDBOX
+ /*
+ * Don't set timeout / delay values here. This results
+ * in these values still being reset to 0.
+ */
+ if (state_get_skip_delays())
+ return;
+#endif
+
/*
* Wait for power to become stable,
* plus spec-defined max time for device to connect
pgood_delay = max(pgood_delay,
(unsigned)simple_strtol(env, NULL, 0));
debug("pgood_delay=%dms\n", pgood_delay);
- mdelay(pgood_delay + 1000);
+
+ /*
+ * Do a minimum delay of the larger value of 100ms or pgood_delay
+ * so that the power can stablize before the devices are queried
+ */
+ hub->query_delay = get_timer(0) + max(100, (int)pgood_delay);
+
+ /*
+ * Record the power-on timeout here. The max. delay (timeout)
+ * will be done based on this value in the USB port loop in
+ * usb_hub_configure() later.
+ */
+ hub->connect_timeout = hub->query_delay + 1000;
+ debug("devnum=%d poweron: query_delay=%d connect_timeout=%d\n",
+ dev->devnum, max(100, (int)pgood_delay),
+ max(100, (int)pgood_delay) + 1000);
}
void usb_hub_reset(void)
{
usb_hub_index = 0;
+
+ /* Zero out global hub_dev in case its re-used again */
+ memset(hub_dev, 0, sizeof(hub_dev));
}
static struct usb_hub_device *usb_hub_allocate(void)
if (!(portstatus & USB_PORT_STAT_CONNECTION))
return -ENOTCONN;
}
- mdelay(200);
/* Reset the port */
ret = legacy_hub_port_reset(dev, port, &portstatus);
return ret;
}
- mdelay(200);
-
switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
case USB_PORT_STAT_SUPER_SPEED:
speed = USB_SPEED_SUPER;
return ret;
}
+static int usb_scan_port(struct usb_device_scan *usb_scan)
+{
+ ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
+ unsigned short portstatus;
+ unsigned short portchange;
+ struct usb_device *dev;
+ struct usb_hub_device *hub;
+ int ret = 0;
+ int i;
+
+ dev = usb_scan->dev;
+ hub = usb_scan->hub;
+ i = usb_scan->port;
+
+ /*
+ * Don't talk to the device before the query delay is expired.
+ * This is needed for voltages to stabalize.
+ */
+ if (get_timer(0) < hub->query_delay)
+ return 0;
+
+ ret = usb_get_port_status(dev, i + 1, portsts);
+ if (ret < 0) {
+ debug("get_port_status failed\n");
+ if (get_timer(0) >= hub->connect_timeout) {
+ debug("devnum=%d port=%d: timeout\n",
+ dev->devnum, i + 1);
+ /* Remove this device from scanning list */
+ list_del(&usb_scan->list);
+ free(usb_scan);
+ return 0;
+ }
+ return 0;
+ }
+
+ portstatus = le16_to_cpu(portsts->wPortStatus);
+ portchange = le16_to_cpu(portsts->wPortChange);
+ debug("Port %d Status %X Change %X\n", i + 1, portstatus, portchange);
+
+ /* No connection change happened, wait a bit more. */
+ if (!(portchange & USB_PORT_STAT_C_CONNECTION)) {
+ if (get_timer(0) >= hub->connect_timeout) {
+ debug("devnum=%d port=%d: timeout\n",
+ dev->devnum, i + 1);
+ /* Remove this device from scanning list */
+ list_del(&usb_scan->list);
+ free(usb_scan);
+ return 0;
+ }
+ return 0;
+ }
+
+ /* Test if the connection came up, and if not exit */
+ if (!(portstatus & USB_PORT_STAT_CONNECTION))
+ return 0;
+
+ /* A new USB device is ready at this point */
+ debug("devnum=%d port=%d: USB dev found\n", dev->devnum, i + 1);
+
+ usb_hub_port_connect_change(dev, i);
+
+ if (portchange & USB_PORT_STAT_C_ENABLE) {
+ debug("port %d enable change, status %x\n", i + 1, portstatus);
+ usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE);
+ /*
+ * The following hack causes a ghost device problem
+ * to Faraday EHCI
+ */
+#ifndef CONFIG_USB_EHCI_FARADAY
+ /*
+ * EM interference sometimes causes bad shielded USB
+ * devices to be shutdown by the hub, this hack enables
+ * them again. Works at least with mouse driver
+ */
+ if (!(portstatus & USB_PORT_STAT_ENABLE) &&
+ (portstatus & USB_PORT_STAT_CONNECTION) &&
+ usb_device_has_child_on_port(dev, i)) {
+ debug("already running port %i disabled by hub (EMI?), re-enabling...\n",
+ i + 1);
+ usb_hub_port_connect_change(dev, i);
+ }
+#endif
+ }
+
+ if (portstatus & USB_PORT_STAT_SUSPEND) {
+ debug("port %d suspend change\n", i + 1);
+ usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_SUSPEND);
+ }
+
+ if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
+ debug("port %d over-current change\n", i + 1);
+ usb_clear_port_feature(dev, i + 1,
+ USB_PORT_FEAT_C_OVER_CURRENT);
+ /* Only power-on this one port */
+ usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
+ hub->overcurrent_count[i]++;
+
+ /*
+ * If the max-scan-count is not reached, return without removing
+ * the device from scan-list. This will re-issue a new scan.
+ */
+ if (hub->overcurrent_count[i] <=
+ PORT_OVERCURRENT_MAX_SCAN_COUNT)
+ return 0;
+
+ /* Otherwise the device will get removed */
+ printf("Port %d over-current occurred %d times\n", i + 1,
+ hub->overcurrent_count[i]);
+ }
+
+ if (portchange & USB_PORT_STAT_C_RESET) {
+ debug("port %d reset change\n", i + 1);
+ usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET);
+ }
+
+ /*
+ * We're done with this device, so let's remove this device from
+ * scanning list
+ */
+ list_del(&usb_scan->list);
+ free(usb_scan);
+
+ return 0;
+}
+
+static int usb_device_list_scan(void)
+{
+ struct usb_device_scan *usb_scan;
+ struct usb_device_scan *tmp;
+ static int running;
+ int ret = 0;
+
+ /* Only run this loop once for each controller */
+ if (running)
+ return 0;
+
+ running = 1;
+
+ while (1) {
+ /* We're done, once the list is empty again */
+ if (list_empty(&usb_scan_list))
+ goto out;
+
+ list_for_each_entry_safe(usb_scan, tmp, &usb_scan_list, list) {
+ int ret;
+
+ /* Scan this port */
+ ret = usb_scan_port(usb_scan);
+ if (ret)
+ goto out;
+ }
+ }
+
+out:
+ /*
+ * This USB controller has finished scanning all its connected
+ * USB devices. Set "running" back to 0, so that other USB controllers
+ * will scan their devices too.
+ */
+ running = 0;
+
+ return ret;
+}
static int usb_hub_configure(struct usb_device *dev)
{
for (i = 0; i < dev->maxchild; i++)
usb_hub_reset_devices(i + 1);
+ /*
+ * Only add the connected USB devices, including potential hubs,
+ * to a scanning list. This list will get scanned and devices that
+ * are detected (either via port connected or via port timeout)
+ * will get removed from this list. Scanning of the devices on this
+ * list will continue until all devices are removed.
+ */
for (i = 0; i < dev->maxchild; i++) {
- ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
- unsigned short portstatus, portchange;
- int ret;
- ulong start = get_timer(0);
- uint delay = CONFIG_SYS_HZ;
+ struct usb_device_scan *usb_scan;
-#ifdef CONFIG_SANDBOX
- if (state_get_skip_delays())
- delay = 0;
-#endif
-#ifdef CONFIG_DM_USB
- debug("\n\nScanning '%s' port %d\n", dev->dev->name, i + 1);
-#else
- debug("\n\nScanning port %d\n", i + 1);
-#endif
- /*
- * Wait for (whichever finishes first)
- * - A maximum of 10 seconds
- * This is a purely observational value driven by connecting
- * a few broken pen drives and taking the max * 1.5 approach
- * - connection_change and connection state to report same
- * state
- */
- do {
- ret = usb_get_port_status(dev, i + 1, portsts);
- if (ret < 0) {
- debug("get_port_status failed\n");
- break;
- }
-
- portstatus = le16_to_cpu(portsts->wPortStatus);
- portchange = le16_to_cpu(portsts->wPortChange);
-
- /* No connection change happened, wait a bit more. */
- if (!(portchange & USB_PORT_STAT_C_CONNECTION))
- continue;
-
- /* Test if the connection came up, and if so, exit. */
- if (portstatus & USB_PORT_STAT_CONNECTION)
- break;
-
- } while (get_timer(start) < delay);
-
- if (ret < 0)
- continue;
-
- debug("Port %d Status %X Change %X\n",
- i + 1, portstatus, portchange);
-
- if (portchange & USB_PORT_STAT_C_CONNECTION) {
- debug("port %d connection change\n", i + 1);
- usb_hub_port_connect_change(dev, i);
- }
- if (portchange & USB_PORT_STAT_C_ENABLE) {
- debug("port %d enable change, status %x\n",
- i + 1, portstatus);
- usb_clear_port_feature(dev, i + 1,
- USB_PORT_FEAT_C_ENABLE);
- /*
- * The following hack causes a ghost device problem
- * to Faraday EHCI
- */
-#ifndef CONFIG_USB_EHCI_FARADAY
- /* EM interference sometimes causes bad shielded USB
- * devices to be shutdown by the hub, this hack enables
- * them again. Works at least with mouse driver */
- if (!(portstatus & USB_PORT_STAT_ENABLE) &&
- (portstatus & USB_PORT_STAT_CONNECTION) &&
- usb_device_has_child_on_port(dev, i)) {
- debug("already running port %i " \
- "disabled by hub (EMI?), " \
- "re-enabling...\n", i + 1);
- usb_hub_port_connect_change(dev, i);
- }
-#endif
- }
- if (portstatus & USB_PORT_STAT_SUSPEND) {
- debug("port %d suspend change\n", i + 1);
- usb_clear_port_feature(dev, i + 1,
- USB_PORT_FEAT_SUSPEND);
- }
-
- if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
- debug("port %d over-current change\n", i + 1);
- usb_clear_port_feature(dev, i + 1,
- USB_PORT_FEAT_C_OVER_CURRENT);
- usb_hub_power_on(hub);
+ usb_scan = calloc(1, sizeof(*usb_scan));
+ if (!usb_scan) {
+ printf("Can't allocate memory for USB device!\n");
+ return -ENOMEM;
}
+ usb_scan->dev = dev;
+ usb_scan->hub = hub;
+ usb_scan->port = i;
+ list_add_tail(&usb_scan->list, &usb_scan_list);
+ }
- if (portchange & USB_PORT_STAT_C_RESET) {
- debug("port %d reset change\n", i + 1);
- usb_clear_port_feature(dev, i + 1,
- USB_PORT_FEAT_C_RESET);
- }
- } /* end for i all ports */
+ /*
+ * And now call the scanning code which loops over the generated list
+ */
+ ret = usb_device_list_scan();
- return 0;
+ return ret;
}
static int usb_hub_check(struct usb_device *dev, int ifnum)
return usb_hub_configure(udev);
}
-static int usb_hub_post_bind(struct udevice *dev)
-{
- /* Scan the bus for devices */
- return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
-}
-
static int usb_hub_post_probe(struct udevice *dev)
{
debug("%s\n", __func__);
UCLASS_DRIVER(usb_hub) = {
.id = UCLASS_USB_HUB,
.name = "usb_hub",
- .post_bind = usb_hub_post_bind,
+ .post_bind = dm_scan_fdt_dev,
.post_probe = usb_hub_post_probe,
.child_pre_probe = usb_child_pre_probe,
.per_child_auto_alloc_size = sizeof(struct usb_device),
projects / people / ms / u-boot.git / blobdiff