ehci-pci: Prepare for usage of readl()/writel() accessors

[people/ms/u-boot.git] / configs / A10-OLinuXino-Lime_defconfig

diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 6235d1f09c136312d69b0af5528e3a7da381d3b0..ec16a44fbd62af1e43dd2d881744219c42297cb0 100644 (file)
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -5,13 +5,20 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_EMR1=4
 CONFIG_SYS_CLK_FREQ=912000000
 CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_I2C1_ENABLE=y
+CONFIG_SATAPWR="PC3"
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
+CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN4I_EMAC=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y