arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support

[people/ms/u-boot.git] / configs / A20-OLinuXino-Lime2_defconfig

diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index b5181c6880ac6c911e58baf4ee7a8402e65efacf..d48e35dbd728a561127ecf6dcbc520be7fd0abbf 100644 (file)
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -1,17 +1,30 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
+CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_MACH_SUN7I=y
-CONFIG_DRAM_CLK=480
+CONFIG_DRAM_CLK=384
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB0_VBUS_PIN="PC17"
 CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_AHCI=y
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
+CONFIG_DFU_RAM=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
+CONFIG_G_DNL_PRODUCT_NUM=0x1010