cmd: Toggle the default value of CONFIG_CMD_IMLS

[people/ms/u-boot.git] / configs / A33-OLinuXino_defconfig

diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig
index a175a40bad4e29ae8eb0534453a5dc6efcc2e6db..c11991de7e5aa4c3d2627d32a3c449408c70cebd 100644 (file)
--- a/configs/A33-OLinuXino_defconfig
+++ b/configs/A33-OLinuXino_defconfig
@@ -1,43 +1,26 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN8I_A33=y
-
 CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=15291
 CONFIG_DRAM_ODT_EN=y
-
 CONFIG_MMC0_CD_PIN="PB4"
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_AXP_GPIO=y
 CONFIG_USB0_ID_DET="PB3"
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_BL_EN="PB2"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_VGA_VIA_LCD is not set
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER=""
-CONFIG_VIDEO_LCD_RESET=""
-CONFIG_VIDEO_LCD_BL_EN="PB2"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=y
-
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_USB_MUSB_HOST=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y