Clean all defconfigs with savedefconfig

[people/ms/u-boot.git] / configs / Ippo_q8h_v1_2_a33_1024x600_defconfig

diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
index f54e2eefbf764db9aa2782cef66fbe62ab471378..5b1080f7deb5115202cdd3655635a68a1d59b8c4 100644 (file)
--- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
+++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
@@ -1,9 +1,8 @@
-# This is a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb,
-# with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A33=y
+CONFIG_DRAM_CLK=480
+CONFIG_DRAM_ZQ=15291
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
 CONFIG_AXP_GPIO=y
@@ -12,13 +11,9 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A33=y
-CONFIG_DRAM_CLK=480
-# zq = 0x3bbb
-CONFIG_DRAM_ZQ=15291
-# Wifi power
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 CONFIG_AXP221_DLDO1_VOLT=3300
-# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
 CONFIG_AXP221_ALDO1_VOLT=3000