cmd: Toggle the default value of CONFIG_CMD_IMLS

[people/ms/u-boot.git] / configs / at91sam9xeek_dataflash_cs1_defconfig

diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig
index 8a3500a5e980caf08baf15ceffbcf234f25c2b96..667d5cc0def548e3715d114ed9920624f54c2cea 100644 (file)
--- a/configs/at91sam9xeek_dataflash_cs1_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs1_defconfig
@@ -5,29 +5,36 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1"
-CONFIG_ENV_IS_IN_DATAFLASH=y
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
@@ -39,5 +46,9 @@ CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
+CONFIG_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y