serial: mxc: Add debug uart support

[people/ms/u-boot.git] / configs / imx6qdl_icore_mmc_defconfig

diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 221ea7e2c4d502a6c8c15254f07465e2022f6863..2b1bb3d5911677e8a6f06689460cdb2555bdb86c 100644 (file)
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -1,42 +1,51 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_VIDEO=y
+# CONFIG_CMD_BMODE is not set
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
-CONFIG_SYS_PROMPT="icorem6qdl> "
-CONFIG_SPL=y
 CONFIG_BOOTDELAY=3
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_DISPLAY_CPUINFO=y
+CONFIG_SPL=y
+CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_HUSH_PARSER=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_SYS_MAXARGS=32
+CONFIG_SYS_PROMPT="icorem6qdl> "
 # CONFIG_CMD_IMLS is not set
-CONFIG_CMD_BOOTZ=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_LIBFDT=y
+CONFIG_OF_LIST="imx6q-icore imx6dl-icore"
+# CONFIG_BLK is not set
+CONFIG_SYS_I2C_MXC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_SMSC=y
 CONFIG_FEC_MXC=y
-CONFIG_MXC_UART=y
-CONFIG_NETDEVICES=y
-CONFIG_IMX_THERMAL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_MXC_UART=y
+CONFIG_IMX_THERMAL=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_MXC=y
+CONFIG_DEBUG_UART_BASE=0x021f0000
+CONFIG_DEBUG_UART_CLOCK=24000000