Makefile: Don't mess with .text section location for selected arches

[people/ms/u-boot.git] / configs / kc1_defconfig

diff --git a/configs/kc1_defconfig b/configs/kc1_defconfig
index 87b3eec4623c4fa2dafa5b4106198b7b9040b29a..ec5fb5ea34b6a982fb5b75843a55a421a7ddd582 100644 (file)
--- a/configs/kc1_defconfig
+++ b/configs/kc1_defconfig
@@ -4,41 +4,31 @@ CONFIG_SYS_TEXT_BASE=0x80100000
 CONFIG_OMAP44XX=y
 CONFIG_TARGET_KC1=y
 # CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SPL=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="kc1 # "
 CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_FASTBOOT_BUF_SIZE=0x2000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_OMAP2PLUS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451