arm: zynq: Enable distro defaults setting

[people/ms/u-boot.git] / configs / ls1021aqds_sdcard_qspi_defconfig

diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig
index ea8738fa90e362f521ade25f25115a6073214caa..7c4b95c12e517cf05c8aae9b0f80002aafc6ecc4 100644 (file)
--- a/configs/ls1021aqds_sdcard_qspi_defconfig
+++ b/configs/ls1021aqds_sdcard_qspi_defconfig
@@ -6,7 +6,6 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_VIDEO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -24,14 +23,13 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
 CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -42,12 +40,15 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_FSL_DDR3=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_PHYLIB=y
 CONFIG_NETDEVICES=y
+CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
@@ -58,8 +59,10 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
 CONFIG_VIDEO_FSL_DCU_FB=y
+CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set