cmd: Toggle the default value of CONFIG_CMD_IMLS

[people/ms/u-boot.git] / configs / ls1043ardb_nand_defconfig

diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index c055097e7964303b6d2daa2584800656605a1261..cc14e0364d5d72c7e17f650b1d9d45c87e69ab08 100644 (file)
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -12,8 +12,9 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
 CONFIG_NAND_BOOT=y
-CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
@@ -21,10 +22,12 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PXE=y
@@ -35,11 +38,14 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_PHYLIB=y
 CONFIG_NETDEVICES=y
+CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y