cmd: Toggle the default value of CONFIG_CMD_IMLS

[people/ms/u-boot.git] / configs / nitrogen6s1g_defconfig

diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig
index 7e2eb86146943c5969ce9de288c5e36c49765ff7..960f488648bae067d06a3edde7de07b2dc3d1206 100644 (file)
--- a/configs/nitrogen6s1g_defconfig
+++ b/configs/nitrogen6s1g_defconfig
@@ -2,25 +2,28 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_VIDEO=y
+CONFIG_CMD_HDMIDETECT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024"
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 # CONFIG_SYS_STDIO_DEREGISTER is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
+CONFIG_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT2=y
@@ -28,16 +31,23 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_NETDEVICES=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Boundary"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Boundary"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
 # CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_OF_LIBFDT=y