Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / configs / pm9263_defconfig

diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig
index 44c78e16075817d27b4d763a54399a2fb3a0a508..38102dcb0daa19a0bf8e27c716f502ee720ca8ca 100644 (file)
--- a/configs/pm9263_defconfig
+++ b/configs/pm9263_defconfig
@@ -1,11 +1,51 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0
 CONFIG_TARGET_PM9263=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 "
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_BOARD_EARLY_INIT_F=y
+# CONFIG_AUTO_COMPLETE is not set
 CONFIG_SYS_PROMPT="u-boot-pm9263> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_JFFS2=y
+CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_BOOTP_BOOTPATH=y
+CONFIG_BOOTP_GATEWAY=y
+CONFIG_BOOTP_HOSTNAME=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_LCD=y