usb: net: migrate USB Ethernet adapters to Kconfig

[people/ms/u-boot.git] / configs / puma-rk3399_defconfig

diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 4e5c9234aa466c10575b19f18260fedf1bd1963c..1badf80beb48da91d214d3afa4ce99da180dc4e0 100644 (file)
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -8,12 +8,13 @@ CONFIG_TARGET_PUMA_RK3399=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x80000
-CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma"
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-ddr1600"
+CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-CONFIG_SPL_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
 # CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
@@ -22,14 +23,20 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SYSCON=y
@@ -37,6 +44,7 @@ CONFIG_SPL_SYSCON=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MISC=y
 CONFIG_ROCKCHIP_EFUSE=y
 CONFIG_MMC_DW=y
@@ -46,7 +54,6 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ9031=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
@@ -61,7 +68,6 @@ CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y
-CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_BASE=0xFF180000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART_SHIFT=2
@@ -74,4 +80,14 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
 CONFIG_ERRNO_STR=y