omap3_logic: Fix Environmental location

[people/ms/u-boot.git] / configs / sama5d2_xplained_mmc_defconfig

diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 2602aff9bcc60d38f11473823afa3c2c79af7f97..1f200f68a35b80ced639b3e498a91d8c6ae5d5c0 100644 (file)
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D2_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -14,27 +15,29 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
+CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_LOADS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
+CONFIG_ENV_IS_IN_FAT=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -48,6 +51,7 @@ CONFIG_DM_GPIO=y
 CONFIG_ATMEL_PIO4=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
@@ -68,10 +72,14 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_FAT_WRITE=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y