mx6sabresd: Add fastboot support

[people/ms/u-boot.git] / configs / woodburn_sd_defconfig

diff --git a/configs/woodburn_sd_defconfig b/configs/woodburn_sd_defconfig
index 96da4d87b57741b590380ea3b4d7a45ce616688d..4fe5f2f1bf327f6583535e240bf4c4574c6bfd29 100644 (file)
--- a/configs/woodburn_sd_defconfig
+++ b/configs/woodburn_sd_defconfig
@@ -2,20 +2,41 @@ CONFIG_ARM=y
 CONFIG_TARGET_WOODBURN_SD=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg"
 CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="woodburn U-Boot > "
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
+CONFIG_EFI_PARTITION=y
+# CONFIG_PARTITION_UUIDS is not set
+# CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_NAND=y
+CONFIG_NAND_MXC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y