Patch by Josef Wagner, 04 Jun 2004:

[people/ms/u-boot.git] / cpu / mc9328 / serial.c

diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c
index 45b6f8afd432426da2b6e8e20209f5673aaf1206..8dcfb80274cffc7535ea2585be8be1b06f69ce3a 100644 (file)
--- a/cpu/mc9328/serial.c
+++ b/cpu/mc9328/serial.c
@@ -1,6 +1,6 @@
 /*
- * cpu/mc9328/serial.c 
- * 
+ * cpu/mc9328/serial.c
+ *
  * (c) Copyright 2004
  * Techware Information Technology, Inc.
  * http://www.techware.com.tw/
@@ -23,11 +23,10 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
 #include <mc9328.h>
 
-#if defined(CONFIG_UART1) 
+#if defined(CONFIG_UART1)
 /* GPIO PORT B                 */
 
 #define reg_GIUS       MX1_GIUS_C
@@ -35,7 +34,6 @@
 #define GPIO_MASK      0xFFFFE1FF
 #define UART_BASE      0x00206000
 
-
 #elif defined (CONFIG_UART2)
 /* GPIO PORT C         */
 
@@ -44,7 +42,7 @@
 #define GPIO_MASK      0x0FFFFFFF
 #define UART_BASE      0x207000
 
-#endif 
+#endif
 
 #define reg_URXD       (*((volatile u32 *)(UART_BASE+0x00)))
 #define reg_UTXD       (*((volatile u32 *)(UART_BASE+0x40)))
@@ -64,16 +62,13 @@
 #define TXFE_MASK      0x4000          /* Tx buffer empty      */
 #define RDR_MASK       0x0001          /* receive data ready   */
 
-
 void serial_setbrg (void) {
 
-/* config I/O pins for UART    */
-
+       /* config I/O pins for UART     */
        reg_GIUS        &= GPIO_MASK;
        reg_GPR         &= GPIO_MASK;
 
-/* config UART                 */
-
+       /* config UART                  */
        reg_UCR1        = 5;
        reg_UCR2        = 0x4027;
        reg_UCR4        = 1;
@@ -84,22 +79,18 @@ void serial_setbrg (void) {
        reg_UBRC        = 8;
 }
 
-
-
 /*
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
  *
  */
- 
+
 int serial_init (void) {
        serial_setbrg ();
 
        return (0);
 }
 
-
-
 /*
  * Read a single byte from the serial port. Returns 1 on success, 0
  * otherwise. When the function is succesfull, the character read is
@@ -112,7 +103,6 @@ int serial_getc (void) {
        return (u8)reg_URXD;
 }
 
-
 /*
  * Output a single byte to the serial port.
  */
@@ -129,7 +119,6 @@ void serial_putc (const char c) {
 
 }
 
-
 /*
  * Test whether a character is in the RX buffer
  */
@@ -137,10 +126,8 @@ int serial_tstc (void) {
        return reg_USR2 & RDR_MASK;
 }
 
-
 void serial_puts (const char *s) {
        while (*s) {
                serial_putc (*s++);
        }
 }
-