#
# Copyright (c) 2011 The Chromium OS Authors.
#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# SPDX-License-Identifier: GPL-2.0+
#
Device Tree Control in U-Boot
To use this feature you will need to get the device tree compiler here:
- git://jdl.com/software/dtc.git
+ git://git.kernel.org/pub/scm/utils/dtc/dtc.git
For example:
- $ git clone git://jdl.com/software/dtc.git
+ $ git clone git://git.kernel.org/pub/scm/utils/dtc/dtc.git
$ cd dtc
$ make
$ sudo make install
* Bad configuration: 0
* Strange test result: 0
-You will also find a useful ftdump utility for decoding a binary file.
+You will also find a useful fdtdump utility for decoding a binary file, as
+well as fdtget/fdtput for reading and writing properties in a binary file.
Where do I get an fdt file for my board?
board/<vendor>/dts/<name>.dts
This should include your CPU or SOC's device tree file, placed in
-arch/<arch>/dts, and then make any adjustments required. The name of this
-is CONFIG_ARCH_DEVICE_TREE.dts.
+arch/<arch>/dts, and then make any adjustments required.
If CONFIG_OF_EMBED is defined, then it will be picked up and built into
-the U-Boot image (including u-boot.bin).
+the U-Boot image (including u-boot.bin). This is suitable for debugging
+and development only and is not recommended for production devices.
If CONFIG_OF_SEPARATE is defined, then it will be built and placed in
a u-boot.dtb file alongside u-boot.bin. A common approach is then to
cat u-boot.bin u-boot.dtb >image.bin
-and then flash image.bin onto your board.
+and then flash image.bin onto your board. Note that U-Boot creates
+u-boot-dtb.bin which does the above step for you also. If you are using
+CONFIG_SPL_FRAMEWORK, then u-boot.img will be built to include the device
+tree binary.
+
+If CONFIG_OF_BOARD is defined, a board-specific routine will provide the
+device tree at runtime, for example if an earlier bootloader stage creates
+it and passes it to U-Boot.
If CONFIG_OF_HOSTFILE is defined, then it will be read from a file on
startup. This is only useful for sandbox. Use the -d flag to U-Boot to
You cannot use more than one of these options at the same time.
+To use a device tree file that you have compiled yourself, pass
+EXT_DTB=<filename> to 'make', as in:
+
+ make EXT_DTB=boot/am335x-boneblack-pubkey.dtb
+
+Then U-Boot will copy that file to u-boot.dtb, put it in the .img file
+if used, and u-boot-dtb.bin.
+
If you wish to put the fdt at a different address in memory, you can
define the "fdtcontroladdr" environment variable. This is the hex
address of the fdt binary blob, and will override either of the options.
Be aware that this environment variable is checked prior to relocation,
when only the compiled-in environment is available. Therefore it is not
possible to define this variable in the saved SPI/NAND flash
-environment, for example (it will be ignored).
+environment, for example (it will be ignored). After relocation, this
+variable will be set to the address of the newly relocated fdt blob.
+It is read-only and cannot be changed. It can optionally be used to
+control the boot process of Linux with bootm/bootz commands.
To use this, put something like this in your board header file:
projects / people / ms / u-boot.git / blobdiff