Merge git://git.denx.de/u-boot-mmc

[people/ms/u-boot.git] / doc / README.zynq

diff --git a/doc/README.zynq b/doc/README.zynq
index ea1c8c1412499ee815a727a2decea195ba463714..cc5c0de21741f0f6c17dbf3a38bc2880a459de05 100644 (file)
--- a/doc/README.zynq
+++ b/doc/README.zynq
@@ -17,9 +17,8 @@ Xilinx Zynq-7000 All Programmable SoCs enable extensive system level
 differentiation, integration, and flexibility through hardware, software,
 and I/O programmability.
 
-* zc70x
-  - zc702 (single qspi, gem0, mmc) [1]
-  - zc706 (dual parallel qspi, gem0, mmc) [2]
+* zc702 (single qspi, gem0, mmc) [1]
+* zc706 (dual parallel qspi, gem0, mmc) [2]
 * zed (single qspi, gem0, mmc) [3]
 * microzed (single qspi, gem0, mmc) [4]
 * zc770
@@ -28,7 +27,13 @@ and I/O programmability.
   - zc770-xm012 (nor)
   - zc770-xm013 (dual parallel qspi, gem1)
 
-3. Bootmode
+3. Building
+
+ ex. configure and build for zc702 board
+   $ make zynq_zc702_config
+   $ make
+
+4. Bootmode
 
 Zynq has a facility to read the bootmode from the slcr bootmode register
 once user is setting through jumpers on the board - see page no:1546 on [5]
@@ -48,27 +53,26 @@ SLCR bootmode register Bit[3:0] values
 "modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot"
 bootmode strings at runtime.
 
-4. Mainline status
+5. Mainline status
 
 - Added basic board configurations support.
 - Added zynq u-boot bsp code - arch/arm/cpu/armv7/zynq
-- Added zynq boards named - zynq, zynq_dcc
+- Added zynq boards named - zc70x, zed, microzed, zc770_xm010/xm011/xm012/xm013
 - Added zynq drivers:
   serial - drivers/serial/serial_zynq.c
   net - drivers/net/zynq_gem.c
   mmc - drivers/mmc/zynq_sdhci.c
-  mmc - drivers/mmc/zynq_sdhci.c
-  spi-  drivers/spi/zynq_spi.c
+  spi - drivers/spi/zynq_spi.c
+  qspi - drivers/spi/zynq_qspi.c
   i2c - drivers/i2c/zynq_i2c.c
+  nand - drivers/mtd/nand/zynq_nand.c
+- Done proper cleanups on board configurations
+- Added basic FDT support for zynq boards
+- d-cache support for zynq_gem.c
 
-5. TODO
+6. TODO
 
-- Add zynq boards support - zc70x, zed, microzed, zc770
-- Add zynq qspi controller driver
-- Add zynq nand controller driver
-- d-cache support for zynq_gem.c
-- FDT support for zynq boards
-- Need proper cleanups on board configurations
+- Add FDT support on individual drivers
 
 [1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm
 [2] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm