rename CFG_ macros to CONFIG_SYS

[people/ms/u-boot.git] / drivers / hwmon / lm75.c

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 17379e53186cd9cf61dd65dd9b6000b4e44f2e80..81198215ff6cdf867df3ffd1ac88a06d6fd6b772 100644 (file)
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -32,8 +32,8 @@
 /*
  * Device code
  */
-#if defined(CFG_I2C_DTT_ADDR)
-#define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR
+#if defined(CONFIG_SYS_I2C_DTT_ADDR)
+#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR
 #else
 #define DTT_I2C_DEV_CODE 0x48                  /* ON Semi's LM75 device */
 #endif
@@ -124,12 +124,12 @@ static int _dtt_init(int sensor)
        int val;
 
        /* Setup TSET ( trip point ) register */
-       val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
+       val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
        if (dtt_write(sensor, DTT_TEMP_SET, val) != 0)
                return 1;
 
        /* Setup THYST ( untrip point ) register - Hysteresis */
-       val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+       val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
        if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
                return 1;
 
@@ -157,7 +157,7 @@ int dtt_init (void)
 
        /* switch to correct I2C bus */
        old_bus = I2C_GET_BUS();
-       I2C_SET_BUS(CFG_DTT_BUS_NUM);
+       I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
 
        for (i = 0; i < sizeof(sensors); i++) {
        if (_dtt_init(sensors[i]) != 0)