appear as block devices in U-Boot and can support filesystems such
as EXT4 and FAT.
-config DM_MMC_OPS
- bool "Support MMC controller operations using Driver Model"
- depends on DM_MMC
- default y if DM_MMC
+config SPL_DM_MMC
+ bool "Enable MMC controllers using Driver Model in SPL"
+ depends on SPL_DM && DM_MMC
+ default y
help
- Driver model provides a means of supporting device operations. This
- option moves MMC operations under the control of driver model. The
- option will be removed as soon as all DM_MMC drivers use it, as it
- will the only supported behaviour.
+ This enables the MultiMediaCard (MMC) uclass which supports MMC and
+ Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
+ and non-removable (e.g. eMMC chip) devices are supported. These
+ appear as block devices in U-Boot and can support filesystems such
+ as EXT4 and FAT.
if MMC
operations too, which can remove the need for malloc support in SPL
and thus further reduce footprint.
-config MSM_SDHCI
- bool "Qualcomm SDHCI controller"
- depends on DM_MMC && BLK && DM_MMC_OPS
- depends on MMC_SDHCI
- help
- Enables support for SDHCI 2.0 controller present on some Qualcomm
- Snapdragon devices. This device is compatible with eMMC v4.5 and
- SD 3.0 specifications. Both SD and eMMC devices are supported.
- Card-detect gpios are not supported.
-
-config ATMEL_SDHCI
- bool "Atmel SDHCI controller support"
- depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
- depends on MMC_SDHCI
- help
- This enables support for the Atmel SDHCI controller, which supports
- the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
- Memory Card Specification V3.0, and the SDIO V3.0 specification.
- It is compliant with the SD Host Controller Standard V3.0
- specification.
-
config MMC_DAVINCI
bool "TI DAVINCI Multimedia Card Interface support"
depends on ARCH_DAVINCI
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on Altera SOCFPGA.
+config MMC_MESON_GX
+ bool "Meson GX EMMC controller support"
+ depends on DM_MMC && BLK && ARCH_MESON
+ help
+ Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
+
config MMC_MXC
bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
help
If unsure, say N.
+config MMC_PCI
+ bool "Support for MMC controllers on PCI"
+ help
+ This selects PCI-based MMC controllers.
+ If you have an MMC controller on a PCI bus, say Y here.
+
+ If unsure, say N.
+
config MMC_OMAP_HS
bool "TI OMAP High Speed Multimedia Card Interface support"
+ select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
+ select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
help
This selects the TI OMAP High Speed Multimedia card Interface.
If you have an omap2plus board with a Multimedia Card slot,
If unsure, say N.
-config SH_SDHI
- bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
- depends on RMOBILE
+config MMC_OMAP36XX_PINS
+ bool "Enable MMC1 on OMAP36xx/37xx"
+ depends on OMAP34XX && MMC_OMAP_HS
help
- Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
+ This enables extended-drain in the MMC/SD/SDIO1I/O and
+ GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
+ specific to the OMAP36xx/37xx using MMC1
-config PIC32_SDHCI
- bool "Microchip PIC32 on-chip SDHCI support"
- depends on DM_MMC && MACH_PIC32
- depends on MMC_SDHCI
- help
- Support for Microchip PIC32 SDHCI controller.
+ If you have a controller with this interface, say Y here.
-config ZYNQ_SDHCI
- bool "Arasan SDHCI controller support"
- depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
- depends on MMC_SDHCI
- help
- Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+ If unsure, say N.
-config ROCKCHIP_SDHCI
- bool "Arasan SDHCI controller for Rockchip support"
- depends on DM_MMC && BLK && DM_MMC_OPS
- depends on MMC_SDHCI
+config SH_SDHI
+ bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
+ depends on ARCH_RMOBILE
help
- Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
+ Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
config MMC_UNIPHIER
- bool "UniPhier SD/MMC Host Controller support"
- depends on ARCH_UNIPHIER
- depends on BLK && DM_MMC_OPS
+ bool "UniPhier/RCar SD/MMC Host Controller support"
+ depends on ARCH_UNIPHIER || ARCH_RMOBILE
+ depends on BLK && DM_MMC
depends on OF_CONTROL
help
- This selects support for the SD/MMC Host Controller on UniPhier SoCs.
+ This selects support for the Matsushita SD/MMC Host Controller on
+ SocioNext UniPhier and Renesas RCar SoCs.
-config SANDBOX_MMC
+config MMC_SANDBOX
bool "Sandbox MMC support"
- depends on MMC && SANDBOX
+ depends on SANDBOX
+ depends on BLK && DM_MMC && OF_CONTROL
help
This select a dummy sandbox MMC driver. At present this does nothing
other than allow sandbox to be build with MMC support. This
This enables support for the SDMA (Single Operation DMA) defined
in the SD Host Controller Standard Specification Version 1.00 .
+config MMC_SDHCI_ATMEL
+ bool "Atmel SDHCI controller support"
+ depends on ARCH_AT91
+ depends on DM_MMC && BLK && ARCH_AT91
+ depends on MMC_SDHCI
+ help
+ This enables support for the Atmel SDHCI controller, which supports
+ the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
+ Memory Card Specification V3.0, and the SDIO V3.0 specification.
+ It is compliant with the SD Host Controller Standard V3.0
+ specification.
+
config MMC_SDHCI_BCM2835
tristate "SDHCI support for the BCM2835 SD/MMC Controller"
depends on ARCH_BCM283X
config MMC_SDHCI_CADENCE
bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
- depends on BLK && DM_MMC_OPS
+ depends on BLK && DM_MMC
depends on MMC_SDHCI
depends on OF_CONTROL
help
If you have a controller with this interface, say Y here.
+config MMC_SDHCI_MSM
+ bool "Qualcomm SDHCI controller"
+ depends on BLK && DM_MMC
+ depends on MMC_SDHCI
+ help
+ Enables support for SDHCI 2.0 controller present on some Qualcomm
+ Snapdragon devices. This device is compatible with eMMC v4.5 and
+ SD 3.0 specifications. Both SD and eMMC devices are supported.
+ Card-detect gpios are not supported.
+
config MMC_SDHCI_MV
bool "SDHCI support on Marvell platform"
depends on ARCH_MVEBU
If unsure, say N.
+config MMC_SDHCI_PIC32
+ bool "Microchip PIC32 on-chip SDHCI support"
+ depends on DM_MMC && MACH_PIC32
+ depends on MMC_SDHCI
+ help
+ Support for Microchip PIC32 SDHCI controller.
+
+config MMC_SDHCI_ROCKCHIP
+ bool "Arasan SDHCI controller for Rockchip support"
+ depends on ARCH_ROCKCHIP
+ depends on DM_MMC && BLK
+ depends on MMC_SDHCI
+ help
+ Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
+
config MMC_SDHCI_S5P
bool "SDHCI support on Samsung S5P SoC"
depends on MMC_SDHCI
If unsure, say N.
+config MMC_SDHCI_STI
+ bool "SDHCI support for STMicroelectronics SoC"
+ depends on MMC_SDHCI && OF_CONTROL
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ on STMicroelectronics STiH410 SoC.
+
+config MMC_SDHCI_XENON
+ bool "SDHCI support for the Xenon SDHCI controller"
+ depends on MMC_SDHCI && DM_MMC && OF_CONTROL
+ help
+ Support for Xenon SDHCI host controller on Marvell Armada 3700
+ 7k/8k ARM SoCs platforms
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_TANGIER
+ bool "Tangier SDHCI controller support"
+ depends on DM_MMC && BLK
+ depends on MMC_SDHCI
+ help
+ This selects support for SDHCI controller on Tanginer
+ SoC. Note that this controller does not sit on PCI bus and,
+ hence, cannot be enumerated by standard PCI means.
+
+ If you're using an Intel Tangier SoC (available on Intel
+ Edison board), say Y here.
+
+ If unsure, say N.
+
config MMC_SDHCI_TEGRA
bool "SDHCI platform support for the Tegra SD/MMC Controller"
depends on TEGRA
If unsure, say N.
+config MMC_SDHCI_ZYNQ
+ bool "Arasan SDHCI controller support"
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP
+ depends on DM_MMC && OF_CONTROL && BLK
+ depends on MMC_SDHCI
+ help
+ Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+
config MMC_SUNXI
bool "Allwinner sunxi SD/MMC Host Controller support"
depends on ARCH_SUNXI && !UART0_PORT_F
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
+config MMC_SUNXI_HAS_NEW_MODE
+ bool
+ depends on MMC_SUNXI
+
+config GENERIC_ATMEL_MCI
+ bool "Atmel Multimedia Card Interface support"
+ depends on DM_MMC && BLK && ARCH_AT91
+ help
+ This enables support for Atmel High Speed Multimedia Card Interface
+ (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
+ the SD Memory Card Specification V2.0, the SDIO V2.0 specification
+ and CE-ATA V1.1.
+
endif
+config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
+ bool "Disable external clock loopback"
+ depends on MMC_SDHCI_TEGRA && TEGRA124
+ help
+ Disable the external clock loopback and use the internal one on SDMMC3
+ as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
+ being set to 0xfffd according to the TRM.
+
+ TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
+ approach once proper kernel integration made it mainline.
+
endmenu
config SYS_FSL_ERRATUM_ESDHC111
projects / people / ms / u-boot.git / blobdiff