treewide: replace with error() with pr_err()

[people/ms/u-boot.git] / drivers / net / bcm-sf2-eth-gmac.c

diff --git a/drivers/net/bcm-sf2-eth-gmac.c b/drivers/net/bcm-sf2-eth-gmac.c
index 9ff72fa1edc7d5d1ba19299289a81abc851621d1..a2b594ed739af7de7a577699b57648568e1c652a 100644 (file)
--- a/drivers/net/bcm-sf2-eth-gmac.c
+++ b/drivers/net/bcm-sf2-eth-gmac.c
@@ -610,7 +610,7 @@ int gmac_miiphy_read(struct mii_dev *bus, int phyaddr, int devad, int reg)
 
        /* Busy wait timeout is 1ms */
        if (gmac_mii_busywait(1000)) {
-               error("%s: Prepare MII read: MII/MDIO busy\n", __func__);
+               pr_err("%s: Prepare MII read: MII/MDIO busy\n", __func__);
                return -1;
        }
 
@@ -622,7 +622,7 @@ int gmac_miiphy_read(struct mii_dev *bus, int phyaddr, int devad, int reg)
        writel(tmp, GMAC_MII_DATA_ADDR);
 
        if (gmac_mii_busywait(1000)) {
-               error("%s: MII read failure: MII/MDIO busy\n", __func__);
+               pr_err("%s: MII read failure: MII/MDIO busy\n", __func__);
                return -1;
        }
 
@@ -638,7 +638,7 @@ int gmac_miiphy_write(struct mii_dev *bus, int phyaddr, int devad, int reg,
 
        /* Busy wait timeout is 1ms */
        if (gmac_mii_busywait(1000)) {
-               error("%s: Prepare MII write: MII/MDIO busy\n", __func__);
+               pr_err("%s: Prepare MII write: MII/MDIO busy\n", __func__);
                return -1;
        }
 
@@ -651,7 +651,7 @@ int gmac_miiphy_write(struct mii_dev *bus, int phyaddr, int devad, int reg,
        writel(tmp, GMAC_MII_DATA_ADDR);
 
        if (gmac_mii_busywait(1000)) {
-               error("%s: MII write failure: MII/MDIO busy\n", __func__);
+               pr_err("%s: MII write failure: MII/MDIO busy\n", __func__);
                return -1;
        }
 
@@ -742,7 +742,7 @@ int gmac_set_speed(int speed, int duplex)
        } else if (speed == 10) {
                speed_cfg = 0;
        } else {
-               error("%s: Invalid GMAC speed(%d)!\n", __func__, speed);
+               pr_err("%s: Invalid GMAC speed(%d)!\n", __func__, speed);
                return -1;
        }
 
@@ -820,7 +820,7 @@ int gmac_mac_init(struct eth_device *dev)
        writel(0, GMAC0_INT_STATUS_ADDR);
 
        if (dma_init(dma) < 0) {
-               error("%s: GMAC dma_init failed\n", __func__);
+               pr_err("%s: GMAC dma_init failed\n", __func__);
                goto err_exit;
        }
 
@@ -855,7 +855,7 @@ int gmac_mac_init(struct eth_device *dev)
        writel(tmp, GMAC_MII_CTRL_ADDR);
 
        if (gmac_mii_busywait(1000)) {
-               error("%s: Configure MDIO: MII/MDIO busy\n", __func__);
+               pr_err("%s: Configure MDIO: MII/MDIO busy\n", __func__);
                goto err_exit;
        }