serial: mxc: Add debug uart support

[people/ms/u-boot.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c64f4a6d7b0174f8f5b7d803c463c6dc3b1cc81d..97cef7edbda69a08856614270d7d323493e083fc 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -248,6 +248,14 @@ config DEBUG_UART_PIC32
          will need to provide parameters to make this work. The driver will
          be available until the real driver model serial is running.
 
+config DEBUG_UART_MXC
+       bool "IMX Serial port"
+       depends on MXC_UART
+       help
+         Select this to enable a debug UART using the serial_mxc driver. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver model serial is running.
+
 config DEBUG_UART_UNIPHIER
        bool "UniPhier on-chip UART"
        depends on ARCH_UNIPHIER
@@ -491,4 +499,57 @@ config STI_ASC_SERIAL
          on STiH410 SoC. This is a basic implementation,  it supports
          following baudrate 9600, 19200, 38400, 57600 and 115200.
 
+config MPC8XX_CONS
+       bool "Console driver for MPC8XX"
+       depends on 8xx
+       default y
+
+choice
+       prompt "Console port"
+       default 8xx_CONS_SMC1
+       depends on MPC8XX_CONS
+       help
+         Depending on board, select one serial port
+         (CONFIG_8xx_CONS_SMC1 or CONFIG_8xx_CONS_SMC2)
+
+config 8xx_CONS_SMC1
+       bool "SMC1"
+
+config 8xx_CONS_SMC2
+       bool "SMC2"
+
+endchoice
+
+config SYS_SMC_RXBUFLEN
+       int "Console Rx buffer length"
+       depends on MPC8XX_CONS
+       default 1
+       help
+         With CONFIG_SYS_SMC_RXBUFLEN it is possible to define
+         the maximum receive buffer length for the SMC.
+         This option is actual only for 8xx possible.
+         If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE
+         must be defined, to setup the maximum idle timeout for
+         the SMC.
+
+config SYS_MAXIDLE
+       int "maximum idle timeout"
+       depends on MPC8XX_CONS
+       default 0
+
+config SYS_BRGCLK_PRESCALE
+       int "BRG Clock Prescale"
+       depends on MPC8XX_CONS
+       default 1
+
+config SYS_SDSR
+       hex "SDSR Value"
+       depends on MPC8XX_CONS
+       default 0x83
+
+config SYS_SDMR
+       hex "SDMR Value"
+       depends on MPC8XX_CONS
+       default 0
+
 endmenu