serial/serial_arc: set registers address during compilation

[people/ms/u-boot.git] / drivers / serial / serial_arc.c

diff --git a/drivers/serial/serial_arc.c b/drivers/serial/serial_arc.c
index 55d07691fcf227a65eebfee94f9710b096c57c6b..0ee8ce5e7d12e40fd1e4d42d01b6117670d5d12d 100644 (file)
--- a/drivers/serial/serial_arc.c
+++ b/drivers/serial/serial_arc.c
@@ -28,7 +28,7 @@ struct arc_serial_regs {
 #define UART_OVERFLOW_ERR      (1 << 1)
 #define UART_TXEMPTY           (1 << 7)
 
-struct arc_serial_regs *regs;
+struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_ARC_UART_BASE;
 
 static void arc_serial_setbrg(void)
 {
@@ -38,7 +38,7 @@ static void arc_serial_setbrg(void)
                gd->baudrate = CONFIG_BAUDRATE;
 
        arc_console_baud = gd->cpu_clk / (gd->baudrate * 4) - 1;
-       writel(arc_console_baud & 0xff, &regs->baudl);
+       writeb(arc_console_baud & 0xff, &regs->baudl);
 
 #ifdef CONFIG_ARC
        /*
@@ -50,17 +50,16 @@ static void arc_serial_setbrg(void)
         * Until that is fixed, when running on ISS, we will set baudh to !0
         */
        if (gd->arch.running_on_hw)
-               writel((arc_console_baud & 0xff00) >> 8, &regs->baudh);
+               writeb((arc_console_baud & 0xff00) >> 8, &regs->baudh);
        else
-               writel(1, &regs->baudh);
+               writeb(1, &regs->baudh);
 #else
-       writel((arc_console_baud & 0xff00) >> 8, &regs->baudh);
+       writeb((arc_console_baud & 0xff00) >> 8, &regs->baudh);
 #endif
 }
 
 static int arc_serial_init(void)
 {
-       regs = (struct arc_serial_regs *)CONFIG_ARC_UART_BASE;
        serial_setbrg();
        return 0;
 }
@@ -70,15 +69,15 @@ static void arc_serial_putc(const char c)
        if (c == '\n')
                arc_serial_putc('\r');
 
-       while (!(readl(&regs->status) & UART_TXEMPTY))
+       while (!(readb(&regs->status) & UART_TXEMPTY))
                ;
 
-       writel(c, &regs->data);
+       writeb(c, &regs->data);
 }
 
 static int arc_serial_tstc(void)
 {
-       return !(readl(&regs->status) & UART_RXEMPTY);
+       return !(readb(&regs->status) & UART_RXEMPTY);
 }
 
 static int arc_serial_getc(void)
@@ -87,16 +86,10 @@ static int arc_serial_getc(void)
                ;
 
        /* Check for overflow errors */
-       if (readl(&regs->status) & UART_OVERFLOW_ERR)
+       if (readb(&regs->status) & UART_OVERFLOW_ERR)
                return 0;
 
-       return readl(&regs->data) & 0xFF;
-}
-
-static void arc_serial_puts(const char *s)
-{
-       while (*s)
-               arc_serial_putc(*s++);
+       return readb(&regs->data) & 0xFF;
 }
 
 static struct serial_device arc_serial_drv = {
@@ -105,7 +98,7 @@ static struct serial_device arc_serial_drv = {
        .stop   = NULL,
        .setbrg = arc_serial_setbrg,
        .putc   = arc_serial_putc,
-       .puts   = arc_serial_puts,
+       .puts   = default_serial_puts,
        .getc   = arc_serial_getc,
        .tstc   = arc_serial_tstc,
 };