*
* This file is part of the Inventra Controller Driver for Linux.
*
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- *
+ * SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <asm/arch/cpu.h>
writel(reg_value, SUNXI_SRAMC_BASE + 0x04);
}
+/******************************************************************************
+ * Needed for the DFU polling magic
+ ******************************************************************************/
+
+static u8 last_int_usb;
+
+bool dfu_usb_get_reset(void)
+{
+ return !!(last_int_usb & MUSB_INTR_RESET);
+}
+
/******************************************************************************
* MUSB Glue code
******************************************************************************/
/* read and flush interrupts */
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ last_int_usb = musb->int_usb;
if (musb->int_usb)
musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
/* musb_core does not call enable / disable in a balanced manner <sigh> */
static bool enabled = false;
+static struct musb *sunxi_musb;
static int sunxi_musb_enable(struct musb *musb)
{
- int ret;
-
pr_debug("%s():\n", __func__);
+ musb_ep_select(musb->mregs, 0);
+ musb_writeb(musb->mregs, MUSB_FADDR, 0);
+
if (enabled)
return 0;
musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
if (is_host_enabled(musb)) {
- ret = sunxi_usb_phy_vbus_detect(0);
- if (ret) {
- printf("A charger is plugged into the OTG: ");
- return -ENODEV;
+ int id = sunxi_usb_phy_id_detect(0);
+
+ if (id == 1 && sunxi_usb_phy_power_is_on(0))
+ sunxi_usb_phy_power_off(0);
+
+ if (!sunxi_usb_phy_power_is_on(0)) {
+ int vbus = sunxi_usb_phy_vbus_detect(0);
+ if (vbus == 1) {
+ printf("A charger is plugged into the OTG: ");
+ return -ENODEV;
+ }
}
- ret = sunxi_usb_phy_id_detect(0);
- if (ret == 1) {
+
+ if (id == 1) {
printf("No host cable detected: ");
return -ENODEV;
}
- sunxi_usb_phy_power_on(0); /* port power on */
+
+ if (!sunxi_usb_phy_power_is_on(0))
+ sunxi_usb_phy_power_on(0);
}
USBC_ForceVbusValidToHigh(musb->mregs);
if (!enabled)
return;
- if (is_host_enabled(musb))
- sunxi_usb_phy_power_off(0); /* port power off */
-
USBC_ForceVbusValidToLow(musb->mregs);
mdelay(200); /* Wait for the current session to timeout */
};
static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
.mode = MUSB_HOST,
#else
.mode = MUSB_PERIPHERAL,
.platform_ops = &sunxi_musb_ops,
};
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
int musb_usb_probe(struct udevice *dev)
{
struct musb_host_data *host = dev_get_priv(dev);
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+ int ret;
priv->desc_before_addr = true;
- if (!host->host) {
- host->host = musb_init_controller(&musb_plat, NULL,
+ if (!sunxi_musb) {
+ sunxi_musb = musb_init_controller(&musb_plat, NULL,
(void *)SUNXI_USB0_BASE);
- if (!host->host) {
- printf("Failed to init the controller\n");
- return -EIO;
- }
}
- printf("MUSB OTG in host-mode\n");
+ host->host = sunxi_musb;
+ if (!host->host)
+ return -EIO;
+
+ ret = musb_lowlevel_init(host);
+ if (ret == 0)
+ printf("MUSB OTG\n");
- return musb_lowlevel_init(host);
+ return ret;
}
int musb_usb_remove(struct udevice *dev)
void sunxi_musb_board_init(void)
{
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
struct udevice *dev;
/*