Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT

[people/ms/u-boot.git] / include / axp209.h

diff --git a/include/axp209.h b/include/axp209.h
index 043624953add783369ae90e86beffb1e5e4a6d3a..e1b22e3442011a00300451e1e2bade87318a05e1 100644 (file)
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -4,18 +4,46 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#define AXP_GPIO
+enum axp209_reg {
+       AXP209_POWER_STATUS = 0x00,
+       AXP209_CHIP_VERSION = 0x03,
+       AXP209_OUTPUT_CTRL = 0x12,
+       AXP209_DCDC2_VOLTAGE = 0x23,
+       AXP209_DCDC3_VOLTAGE = 0x27,
+       AXP209_LDO24_VOLTAGE = 0x28,
+       AXP209_LDO3_VOLTAGE = 0x29,
+       AXP209_IRQ_ENABLE1 = 0x40,
+       AXP209_IRQ_ENABLE2 = 0x41,
+       AXP209_IRQ_ENABLE3 = 0x42,
+       AXP209_IRQ_ENABLE4 = 0x43,
+       AXP209_IRQ_ENABLE5 = 0x44,
+       AXP209_IRQ_STATUS5 = 0x4c,
+       AXP209_SHUTDOWN = 0x32,
+};
 
-extern int axp209_set_dcdc2(int mvolt);
-extern int axp209_set_dcdc3(int mvolt);
-extern int axp209_set_ldo2(int mvolt);
-extern int axp209_set_ldo3(int mvolt);
-extern int axp209_set_ldo4(int mvolt);
-extern int axp209_init(void);
-extern int axp209_poweron_by_dc(void);
-extern int axp209_power_button(void);
+#define AXP209_POWER_STATUS_ON_BY_DC   (1 << 0)
+#define AXP209_POWER_STATUS_VBUS_USABLE        (1 << 4)
 
-extern int axp_gpio_direction_input(unsigned int pin);
-extern int axp_gpio_direction_output(unsigned int pin, unsigned int val);
-extern int axp_gpio_get_value(unsigned int pin);
-extern int axp_gpio_set_value(unsigned int pin, unsigned int val);
+#define AXP209_OUTPUT_CTRL_EXTEN       (1 << 0)
+#define AXP209_OUTPUT_CTRL_DCDC3       (1 << 1)
+#define AXP209_OUTPUT_CTRL_LDO2                (1 << 2)
+#define AXP209_OUTPUT_CTRL_LDO4                (1 << 3)
+#define AXP209_OUTPUT_CTRL_DCDC2       (1 << 4)
+#define AXP209_OUTPUT_CTRL_LDO3                (1 << 6)
+
+#define AXP209_IRQ5_PEK_UP             (1 << 6)
+#define AXP209_IRQ5_PEK_DOWN           (1 << 5)
+
+#define AXP209_POWEROFF                        (1 << 7)
+
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS               0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT          (1 << 5)
+#define AXP_GPIO0_CTRL                 0x90
+#define AXP_GPIO1_CTRL                 0x92
+#define AXP_GPIO2_CTRL                 0x93
+#define AXP_GPIO_CTRL_OUTPUT_LOW               0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH              0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT                    0x02 /* Input */
+#define AXP_GPIO_STATE                 0x94
+#define AXP_GPIO_STATE_OFFSET                  4