IF_TYPE_SD,
IF_TYPE_SATA,
IF_TYPE_HOST,
+ IF_TYPE_SYSTEMACE,
IF_TYPE_COUNT, /* Number of interface types */
};
char product[20+1]; /* IDE Serial no, SCSI product */
char revision[8+1]; /* firmware revision */
#ifdef CONFIG_BLK
+ /*
+ * For now we have a few functions which take struct blk_desc as a
+ * parameter. This field allows them to look up the associated
+ * device. Once these functions are removed we can drop this field.
+ */
struct udevice *bdev;
#else
unsigned long (*block_read)(struct blk_desc *block_dev,
#define PAD_TO_BLOCKSIZE(size, blk_desc) \
(PAD_SIZE(size, blk_desc->blksz))
+#ifdef CONFIG_BLOCK_CACHE
+/**
+ * blkcache_read() - attempt to read a set of blocks from cache
+ *
+ * @param iftype - IF_TYPE_x for type of device
+ * @param dev - device index of particular type
+ * @param start - starting block number
+ * @param blkcnt - number of blocks to read
+ * @param blksz - size in bytes of each block
+ * @param buf - buffer to contain cached data
+ *
+ * @return - '1' if block returned from cache, '0' otherwise.
+ */
+int blkcache_read(int iftype, int dev,
+ lbaint_t start, lbaint_t blkcnt,
+ unsigned long blksz, void *buffer);
+
+/**
+ * blkcache_fill() - make data read from a block device available
+ * to the block cache
+ *
+ * @param iftype - IF_TYPE_x for type of device
+ * @param dev - device index of particular type
+ * @param start - starting block number
+ * @param blkcnt - number of blocks available
+ * @param blksz - size in bytes of each block
+ * @param buf - buffer containing data to cache
+ *
+ */
+void blkcache_fill(int iftype, int dev,
+ lbaint_t start, lbaint_t blkcnt,
+ unsigned long blksz, void const *buffer);
+
+/**
+ * blkcache_invalidate() - discard the cache for a set of blocks
+ * because of a write or device (re)initialization.
+ *
+ * @param iftype - IF_TYPE_x for type of device
+ * @param dev - device index of particular type
+ */
+void blkcache_invalidate(int iftype, int dev);
+
+/**
+ * blkcache_configure() - configure block cache
+ *
+ * @param blocks - maximum blocks per entry
+ * @param entries - maximum entries in cache
+ */
+void blkcache_configure(unsigned blocks, unsigned entries);
+
+/*
+ * statistics of the block cache
+ */
+struct block_cache_stats {
+ unsigned hits;
+ unsigned misses;
+ unsigned entries; /* current entry count */
+ unsigned max_blocks_per_entry;
+ unsigned max_entries;
+};
+
+/**
+ * get_blkcache_stats() - return statistics and reset
+ *
+ * @param stats - statistics are copied here
+ */
+void blkcache_stats(struct block_cache_stats *stats);
+
+#else
+
+static inline int blkcache_read(int iftype, int dev,
+ lbaint_t start, lbaint_t blkcnt,
+ unsigned long blksz, void *buffer)
+{
+ return 0;
+}
+
+static inline void blkcache_fill(int iftype, int dev,
+ lbaint_t start, lbaint_t blkcnt,
+ unsigned long blksz, void const *buffer) {}
+
+static inline void blkcache_invalidate(int iftype, int dev) {}
+
+#endif
+
#ifdef CONFIG_BLK
struct udevice;
*/
unsigned long (*erase)(struct udevice *dev, lbaint_t start,
lbaint_t blkcnt);
+
+ /**
+ * select_hwpart() - select a particular hardware partition
+ *
+ * Some devices (e.g. MMC) can support partitioning at the hardware
+ * level. This is quite separate from the normal idea of
+ * software-based partitions. MMC hardware partitions must be
+ * explicitly selected. Once selected only the region of the device
+ * covered by that partition is accessible.
+ *
+ * The MMC standard provides for two boot partitions (numbered 1 and 2),
+ * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
+ *
+ * @desc: Block device to update
+ * @hwpart: Hardware partition number to select. 0 means the raw
+ * device, 1 is the first partition, 2 is the second, etc.
+ * @return 0 if OK, -ve on error
+ */
+ int (*select_hwpart)(struct udevice *dev, int hwpart);
};
#define blk_get_ops(dev) ((struct blk_ops *)(dev)->driver->ops)
* @drv_name: Driver name to use for the block device
* @name: Name for the device
* @if_type: Interface type (enum if_type_t)
- * @devnum: Device number, specific to the interface type
+ * @devnum: Device number, specific to the interface type, or -1 to
+ * allocate the next available number
* @blksz: Block size of the device in bytes (typically 512)
* @size: Total size of the device in bytes
* @devp: the new device (which has not been probed)
const char *name, int if_type, int devnum, int blksz,
lbaint_t size, struct udevice **devp);
+/**
+ * blk_create_devicef() - Create a new named block device
+ *
+ * @parent: Parent of the new device
+ * @drv_name: Driver name to use for the block device
+ * @name: Name for the device (parent name is prepended)
+ * @if_type: Interface type (enum if_type_t)
+ * @devnum: Device number, specific to the interface type, or -1 to
+ * allocate the next available number
+ * @blksz: Block size of the device in bytes (typically 512)
+ * @size: Total size of the device in bytes
+ * @devp: the new device (which has not been probed)
+ */
+int blk_create_devicef(struct udevice *parent, const char *drv_name,
+ const char *name, int if_type, int devnum, int blksz,
+ lbaint_t size, struct udevice **devp);
+
/**
* blk_prepare_device() - Prepare a block device for use
*
*/
int blk_unbind_all(int if_type);
+/**
+ * blk_find_max_devnum() - find the maximum device number for an interface type
+ *
+ * Finds the last allocated device number for an interface type @if_type. The
+ * next number is safe to use for a newly allocated device.
+ *
+ * @if_type: Interface type to scan
+ * @return maximum device number found, or -ENODEV if none, or other -ve on
+ * error
+ */
+int blk_find_max_devnum(enum if_type if_type);
+
+/**
+ * blk_select_hwpart() - select a hardware partition
+ *
+ * Select a hardware partition if the device supports it (typically MMC does)
+ *
+ * @dev: Device to update
+ * @hwpart: Partition number to select
+ * @return 0 if OK, -ve on error
+ */
+int blk_select_hwpart(struct udevice *dev, int hwpart);
+
#else
#include <errno.h>
/*
static inline ulong blk_dread(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, void *buffer)
{
+ ulong blks_read;
+ if (blkcache_read(block_dev->if_type, block_dev->devnum,
+ start, blkcnt, block_dev->blksz, buffer))
+ return blkcnt;
+
/*
* We could check if block_read is NULL and return -ENOSYS. But this
* bloats the code slightly (cause some board to fail to build), and
* it would be an error to try an operation that does not exist.
*/
- return block_dev->block_read(block_dev, start, blkcnt, buffer);
+ blks_read = block_dev->block_read(block_dev, start, blkcnt, buffer);
+ if (blks_read == blkcnt)
+ blkcache_fill(block_dev->if_type, block_dev->devnum,
+ start, blkcnt, block_dev->blksz, buffer);
+
+ return blks_read;
}
static inline ulong blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, const void *buffer)
{
+ blkcache_invalidate(block_dev->if_type, block_dev->devnum);
return block_dev->block_write(block_dev, start, blkcnt, buffer);
}
static inline ulong blk_derase(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt)
{
+ blkcache_invalidate(block_dev->if_type, block_dev->devnum);
return block_dev->block_erase(block_dev, start, blkcnt);
}
+
+/**
+ * struct blk_driver - Driver for block interface types
+ *
+ * This provides access to the block devices for each interface type. One
+ * driver should be provided using U_BOOT_LEGACY_BLK() for each interface
+ * type that is to be supported.
+ *
+ * @if_typename: Interface type name
+ * @if_type: Interface type
+ * @max_devs: Maximum number of devices supported
+ * @desc: Pointer to list of devices for this interface type,
+ * or NULL to use @get_dev() instead
+ */
+struct blk_driver {
+ const char *if_typename;
+ enum if_type if_type;
+ int max_devs;
+ struct blk_desc *desc;
+ /**
+ * get_dev() - get a pointer to a block device given its number
+ *
+ * Each interface allocates its own devices and typically
+ * struct blk_desc is contained with the interface's data structure.
+ * There is no global numbering for block devices. This method allows
+ * the device for an interface type to be obtained when @desc is NULL.
+ *
+ * @devnum: Device number (0 for first device on that interface,
+ * 1 for second, etc.
+ * @descp: Returns pointer to the block device on success
+ * @return 0 if OK, -ve on error
+ */
+ int (*get_dev)(int devnum, struct blk_desc **descp);
+
+ /**
+ * select_hwpart() - Select a hardware partition
+ *
+ * Some devices (e.g. MMC) can support partitioning at the hardware
+ * level. This is quite separate from the normal idea of
+ * software-based partitions. MMC hardware partitions must be
+ * explicitly selected. Once selected only the region of the device
+ * covered by that partition is accessible.
+ *
+ * The MMC standard provides for two boot partitions (numbered 1 and 2),
+ * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
+ * Partition 0 is the main user-data partition.
+ *
+ * @desc: Block device descriptor
+ * @hwpart: Hardware partition number to select. 0 means the main
+ * user-data partition, 1 is the first partition, 2 is
+ * the second, etc.
+ * @return 0 if OK, other value for an error
+ */
+ int (*select_hwpart)(struct blk_desc *desc, int hwpart);
+};
+
+/*
+ * Declare a new U-Boot legacy block driver. New drivers should use driver
+ * model (UCLASS_BLK).
+ */
+#define U_BOOT_LEGACY_BLK(__name) \
+ ll_entry_declare(struct blk_driver, __name, blk_driver)
+
+struct blk_driver *blk_driver_lookup_type(int if_type);
+
#endif /* !CONFIG_BLK */
+/**
+ * blk_get_devnum_by_typename() - Get a block device by type and number
+ *
+ * This looks through the available block devices of the given type, returning
+ * the one with the given @devnum.
+ *
+ * @if_type: Block device type
+ * @devnum: Device number
+ * @return point to block device descriptor, or NULL if not found
+ */
+struct blk_desc *blk_get_devnum_by_type(enum if_type if_type, int devnum);
+
+/**
+ * blk_get_devnum_by_type() - Get a block device by type name, and number
+ *
+ * This looks up the block device type based on @if_typename, then calls
+ * blk_get_devnum_by_type().
+ *
+ * @if_typename: Block device type name
+ * @devnum: Device number
+ * @return point to block device descriptor, or NULL if not found
+ */
+struct blk_desc *blk_get_devnum_by_typename(const char *if_typename,
+ int devnum);
+
+/**
+ * blk_dselect_hwpart() - select a hardware partition
+ *
+ * This selects a hardware partition (such as is supported by MMC). The block
+ * device size may change as this effectively points the block device to a
+ * partition at the hardware level. See the select_hwpart() method above.
+ *
+ * @desc: Block device descriptor for the device to select
+ * @hwpart: Partition number to select
+ * @return 0 if OK, -ve on error
+ */
+int blk_dselect_hwpart(struct blk_desc *desc, int hwpart);
+
+/**
+ * blk_list_part() - list the partitions for block devices of a given type
+ *
+ * This looks up the partition type for each block device of type @if_type,
+ * then displays a list of partitions.
+ *
+ * @if_type: Block device type
+ * @return 0 if OK, -ENODEV if there is none of that type
+ */
+int blk_list_part(enum if_type if_type);
+
+/**
+ * blk_list_devices() - list the block devices of a given type
+ *
+ * This lists each block device of the type @if_type, showing the capacity
+ * as well as type-specific information.
+ *
+ * @if_type: Block device type
+ */
+void blk_list_devices(enum if_type if_type);
+
+/**
+ * blk_show_device() - show information about a given block device
+ *
+ * This shows the block device capacity as well as type-specific information.
+ *
+ * @if_type: Block device type
+ * @devnum: Device number
+ * @return 0 if OK, -ENODEV for invalid device number
+ */
+int blk_show_device(enum if_type if_type, int devnum);
+
+/**
+ * blk_print_device_num() - show information about a given block device
+ *
+ * This is similar to blk_show_device() but returns an error if the block
+ * device type is unknown.
+ *
+ * @if_type: Block device type
+ * @devnum: Device number
+ * @return 0 if OK, -ENODEV for invalid device number, -ENOENT if the block
+ * device is not connected
+ */
+int blk_print_device_num(enum if_type if_type, int devnum);
+
+/**
+ * blk_print_part_devnum() - print the partition information for a device
+ *
+ * @if_type: Block device type
+ * @devnum: Device number
+ * @return 0 if OK, -ENOENT if the block device is not connected, -ENOSYS if
+ * the interface type is not supported, other -ve on other error
+ */
+int blk_print_part_devnum(enum if_type if_type, int devnum);
+
+/**
+ * blk_read_devnum() - read blocks from a device
+ *
+ * @if_type: Block device type
+ * @devnum: Device number
+ * @blkcnt: Number of blocks to read
+ * @buffer: Address to write data to
+ * @return number of blocks read, or -ve error number on error
+ */
+ulong blk_read_devnum(enum if_type if_type, int devnum, lbaint_t start,
+ lbaint_t blkcnt, void *buffer);
+
+/**
+ * blk_write_devnum() - write blocks to a device
+ *
+ * @if_type: Block device type
+ * @devnum: Device number
+ * @blkcnt: Number of blocks to write
+ * @buffer: Address to read data from
+ * @return number of blocks written, or -ve error number on error
+ */
+ulong blk_write_devnum(enum if_type if_type, int devnum, lbaint_t start,
+ lbaint_t blkcnt, const void *buffer);
+
+/**
+ * blk_select_hwpart_devnum() - select a hardware partition
+ *
+ * This is similar to blk_dselect_hwpart() but it looks up the interface and
+ * device number.
+ *
+ * @if_type: Block device type
+ * @devnum: Device number
+ * @hwpart: Partition number to select
+ * @return 0 if OK, -ve on error
+ */
+int blk_select_hwpart_devnum(enum if_type if_type, int devnum, int hwpart);
+
#endif
projects / people / ms / u-boot.git / blobdiff