Convert CONFIG_BOOTCOUNT_ENV to Kconfig

[people/ms/u-boot.git] / include / config_distro_bootcmd.h

diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 5a8d7f270867c8bad06145d6c5f393515060e11d..f567cebd381082bc4945d21f68f369bf62646c47 100644 (file)
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -26,10 +26,6 @@
  * message that includes some other pre-processor symbols in the text.
  */
 
-/* We need the part command */
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
 #define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
                "if " #devtypel " dev ${devnum}; then " \
                        "setenv devtype " #devtypel "; " \
@@ -75,10 +71,15 @@
 #ifdef CONFIG_CMD_UBIFS
 #define BOOTENV_SHARED_UBIFS \
        "ubifs_boot=" \
-               "if ubi part UBI && ubifsmount ubi${devnum}:boot; then "  \
-                       "setenv devtype ubi; "                            \
-                       "setenv bootpart 0; "                             \
-                       "run scan_dev_for_boot; "                         \
+               "env exists bootubipart || " \
+                       "env set bootubipart UBI; " \
+               "env exists bootubivol || " \
+                       "env set bootubivol boot; " \
+               "if ubi part ${bootubipart} && " \
+                       "ubifsmount ubi${devnum}:${bootubivol}; " \
+               "then " \
+                       "setenv devtype ubi; " \
+                       "run scan_dev_for_boot; " \
                "fi\0"
 #define BOOTENV_DEV_UBIFS      BOOTENV_DEV_BLKDEV
 #define BOOTENV_DEV_NAME_UBIFS BOOTENV_DEV_NAME_BLKDEV
@@ -95,6 +96,10 @@
 #define BOOTEFI_NAME "bootaa64.efi"
 #elif defined(CONFIG_ARM)
 #define BOOTEFI_NAME "bootarm.efi"
+#elif defined(CONFIG_X86_RUN_32BIT)
+#define BOOTEFI_NAME "bootia32.efi"
+#elif defined(CONFIG_X86_RUN_64BIT)
+#define BOOTEFI_NAME "bootx64.efi"
 #endif
 #endif
 
@@ -116,11 +121,16 @@
 
 #define BOOTENV_SHARED_EFI                                                \
        "boot_efi_binary="                                                \
+               "if fdt addr ${fdt_addr_r}; then "                        \
+                       "bootefi bootmgr ${fdt_addr_r};"                  \
+               "else "                                                   \
+                       "bootefi bootmgr ${fdtcontroladdr};"              \
+               "fi;"                                                     \
                "load ${devtype} ${devnum}:${distro_bootpart} "           \
                        "${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; "      \
                "if fdt addr ${fdt_addr_r}; then "                        \
                        "bootefi ${kernel_addr_r} ${fdt_addr_r};"         \
-               "else"                                                    \
+               "else "                                                   \
                        "bootefi ${kernel_addr_r} ${fdtcontroladdr};"     \
                "fi\0"                                                    \
        \
@@ -153,16 +163,16 @@
 #define SCAN_DEV_FOR_EFI
 #endif
 
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
 #define BOOTENV_SHARED_SATA    BOOTENV_SHARED_BLKDEV(sata)
 #define BOOTENV_DEV_SATA       BOOTENV_DEV_BLKDEV
 #define BOOTENV_DEV_NAME_SATA  BOOTENV_DEV_NAME_BLKDEV
 #else
 #define BOOTENV_SHARED_SATA
 #define BOOTENV_DEV_SATA \
-       BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
+       BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
 #define BOOTENV_DEV_NAME_SATA \
-       BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
+       BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
 #endif
 
 #ifdef CONFIG_SCSI
@@ -190,19 +200,19 @@
        BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
 #endif
 
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
 #define BOOTENV_SHARED_IDE     BOOTENV_SHARED_BLKDEV(ide)
 #define BOOTENV_DEV_IDE                BOOTENV_DEV_BLKDEV
 #define BOOTENV_DEV_NAME_IDE   BOOTENV_DEV_NAME_BLKDEV
 #else
 #define BOOTENV_SHARED_IDE
 #define BOOTENV_DEV_IDE \
-       BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
+       BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
 #define BOOTENV_DEV_NAME_IDE \
-       BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
+       BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
 #endif
 
-#if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI)
+#if defined(CONFIG_DM_PCI)
 #define BOOTENV_RUN_NET_PCI_ENUM "run boot_net_pci_enum; "
 #define BOOTENV_SHARED_PCI \
        "boot_net_pci_enum=pci enum\0"
@@ -230,13 +240,58 @@
 #endif
 
 #if defined(CONFIG_CMD_DHCP)
+#if defined(CONFIG_EFI_LOADER)
+#if defined(CONFIG_ARM64)
+#define BOOTENV_EFI_PXE_ARCH "0xb"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00011:UNDI:003000"
+#elif defined(CONFIG_ARM)
+#define BOOTENV_EFI_PXE_ARCH "0xa"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00010:UNDI:003000"
+#elif defined(CONFIG_X86)
+/* Always assume we're running 64bit */
+#define BOOTENV_EFI_PXE_ARCH "0x7"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00007:UNDI:003000"
+#else
+#error Please specify an EFI client identifier
+#endif
+
+/*
+ * Ask the dhcp server for an EFI binary. If we get one, check for a
+ * device tree in the same folder. Then boot everything. If the file was
+ * not an EFI binary, we just return from the bootefi command and continue.
+ */
+#define BOOTENV_EFI_RUN_DHCP \
+       "setenv efi_fdtfile ${fdtfile}; "                                 \
+       BOOTENV_EFI_SET_FDTFILE_FALLBACK                                  \
+       "setenv efi_old_vci ${bootp_vci};"                                \
+       "setenv efi_old_arch ${bootp_arch};"                              \
+       "setenv bootp_vci " BOOTENV_EFI_PXE_VCI ";"                       \
+       "setenv bootp_arch " BOOTENV_EFI_PXE_ARCH ";"                     \
+       "if dhcp ${kernel_addr_r}; then "                                 \
+               "tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};"              \
+               "if fdt addr ${fdt_addr_r}; then "                        \
+                       "bootefi ${kernel_addr_r} ${fdt_addr_r}; "        \
+               "else "                                                   \
+                       "bootefi ${kernel_addr_r} ${fdtcontroladdr};"     \
+               "fi;"                                                     \
+       "fi;"                                                             \
+       "setenv bootp_vci ${efi_old_vci};"                                \
+       "setenv bootp_arch ${efi_old_arch};"                              \
+       "setenv efi_fdtfile;"                                             \
+       "setenv efi_old_arch;"                                            \
+       "setenv efi_old_vci;"
+#else
+#define BOOTENV_EFI_RUN_DHCP
+#endif
 #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
        "bootcmd_dhcp=" \
                BOOTENV_RUN_NET_USB_START \
                BOOTENV_RUN_NET_PCI_ENUM \
                "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
                        "source ${scriptaddr}; " \
-               "fi\0"
+               "fi;" \
+               BOOTENV_EFI_RUN_DHCP \
+               "\0"
 #define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
        "dhcp "
 #else