Makefile: move all Power Architecture boards into boards.cfg

[people/ms/u-boot.git] / include / configs / APC405.h

diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 7453518bfdd91cb0c5189801fea628c025be8c23..8179e1b0436b298e379a88ebf9b98754fd4e479b 100644 (file)
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -38,6 +38,8 @@
 #define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_APCG405         1       /* ...on a APC405 board         */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF80000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_BOARD_EARLY_INIT_R 1
 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
@@ -104,6 +106,7 @@
 #define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP 1
@@ -124,19 +127,19 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_AUTOSCRIPT
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -175,6 +178,12 @@
 #define CONFIG_SYS_MEMTEST_START       0x0400000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000 /* 4 ... 12 MB in DRAM */
 
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #define CONFIG_SYS_EXT_SERIAL_CLOCK    14745600 /* use external serial clock   */
 
 /* The following table includes the supported baudrates */
@@ -263,16 +272,10 @@
 /*
  * FLASH organization
  */
-#ifndef __ASSEMBLY__
-extern int flash_banks;
-#endif
-
 #define CONFIG_SYS_FLASH_BASE          0xFE000000
 #define CONFIG_SYS_FLASH_CFI           1       /* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER        1       /* Use the common driver */
 #define CONFIG_SYS_MAX_FLASH_SECT      256     /* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS     flash_banks /* max num of flash banks */
-                                           /* updated in board_early_init_r */
 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
 #define CONFIG_SYS_FLASH_QUIET_TEST    1
 #define CONFIG_SYS_FLASH_INCREMENT     0x01000000
@@ -304,6 +307,7 @@ extern int flash_banks;
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C                        /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7F