flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / B4860QDS.h

diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 3ec1c2a91de55d76e4aa36b8537192ddb7c54a99..6b56fe7763508a9fbd413b84366d8c374313cba3 100644 (file)
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -10,8 +10,6 @@
 /*
  * B4860 QDS board configuration file
  */
-#define CONFIG_B4860QDS
-
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
@@ -21,7 +19,6 @@
 #else
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
@@ -38,7 +35,6 @@
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#define CONFIG_SYS_NO_FLASH
 #endif
 #endif
 #endif
@@ -49,13 +45,9 @@
 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
                (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_MP                      /* support multiple processors */
 
@@ -68,23 +60,19 @@
 #endif
 
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_FSL_IFC                 /* Enable IFC Support */
+#define CONFIG_SYS_NUM_CPC             CONFIG_SYS_NUM_DDR_CTLRS
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCIE1                   /* PCIE controller 1 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
-#ifndef CONFIG_PPC_B4420
+#ifndef CONFIG_ARCH_B4420
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1                   /* SRIO port 1 */
 #define CONFIG_SRIO2                   /* SRIO port 2 */
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 #endif
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
-
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x77
 
@@ -119,7 +107,7 @@
 
 #define CONFIG_ENV_OVERWRITE
 
-#ifdef CONFIG_SYS_NO_FLASH
+#ifndef CONFIG_MTD_NOR_FLASH
 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -231,13 +219,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_SYS_FSL_DDR3
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_FSL_DDR_INTERACTIVE
 #endif
@@ -483,9 +469,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x11C600)
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
-#endif
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -687,10 +670,8 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_FMAN_ENET
@@ -795,7 +776,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define __USB_PHY_TYPE ulpi
 
-#ifdef CONFIG_PPC_B4860
+#ifdef CONFIG_ARCH_B4860
 #define HWCONFIG       "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
                        "bank_intlv=cs0_cs1;"   \
                        "en_cpc:cpc2;"