Merge git://git.denx.de/u-boot-fsl-qoriq

[people/ms/u-boot.git] / include / configs / BSC9131RDB.h

diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index e870ffee752bade9fed32dd8616a8939d333c5b4..41162349cf1eefeda764fb5e7a9bf213c0ee21c7 100644 (file)
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -11,12 +11,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
-#ifdef CONFIG_BSC9131RDB
-#define CONFIG_BSC9131
 #define CONFIG_NAND_FSL_IFC
-#endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
@@ -28,8 +23,6 @@
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
@@ -52,14 +45,9 @@
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
 
-
 /* High Level Configuration Options */
-#define CONFIG_BOOKE                   /* BOOKE */
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_FSL_IFC                 /* Enable IFC Support */
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
@@ -81,7 +69,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x01ffffff
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR3
 #undef CONFIG_SYS_DDR_RAW_TIMING
 #undef CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM         0
@@ -96,7 +83,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
 
@@ -211,8 +197,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_CS0_FTIM2           CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS0_FTIM3           CONFIG_SYS_NAND_FTIM3
 
-#define CONFIG_BOARD_EARLY_INIT_F      /* Call board_pre_init */
-
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000      /* stack in RAM */
 #define CONFIG_SYS_INIT_RAM_SIZE       0x00004000/* End of used area in RAM */
@@ -234,19 +218,11 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
-
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED       400000
@@ -259,12 +235,8 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
-#define CONFIG_CMD_I2C
-
-
 /* eSPI - Enhanced SPI */
 #ifdef CONFIG_FSL_ESPI
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #endif
@@ -324,14 +296,8 @@ extern unsigned long get_sdram_size(void);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 /*
@@ -373,10 +339,8 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
 #define CONFIG_HAS_FSL_DR_USB
 #endif
 
@@ -389,13 +353,6 @@ extern unsigned long get_sdram_size(void);
 #define MTDIDS_DEFAULT "nand0=ff800000.flash,"
 #define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
                        "8m(kernel),512k(dtb),-(fs)"
-/*
- * Override partitions in device tree using info
- * in "mtdparts" environment variable
- */
-#ifdef CONFIG_CMD_MTDPARTS
-#define CONFIG_FDT_FIXUP_PARTITIONS
-#endif
 
 /*
  * Environment Configuration
@@ -411,7 +368,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_UBOOTPATH       "u-boot.bin" /* U-Boot image on TFTP server */
 
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTDELAY       10 /* -1 disable auto-boot */
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "netdev=eth0\0"                                         \
@@ -421,7 +377,7 @@ extern unsigned long get_sdram_size(void);
        "consoledev=ttyS0\0"                            \
        "ramdiskaddr=2000000\0"                 \
        "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
-       "fdtaddr=c00000\0"                              \
+       "fdtaddr=1e00000\0"                             \
        "fdtfile=bsc9131rdb.dtb\0"              \
        "bdev=sda1\0"   \
        "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \