drivers, block: remove sil680 driver

[people/ms/u-boot.git] / include / configs / CPCI4052.h

diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index ffae107a9a8313e3514c0b38336f1f8948dca5db..c66b26ff82df03196265d2d253956d3e7ad78b1c 100644 (file)
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -23,15 +23,11 @@
 #undef  CONFIG_CPCI405_6U               /* enable this for 6U boards    */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
-#define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R      1      /* call misc_init_r()           */
 
 #define CONFIG_SYS_CLK_FREQ    33330000 /* external frequency to pll   */
 
-#define CONFIG_BAUDRATE                9600
-
 #undef CONFIG_BOOTARGS
 #undef CONFIG_BOOTCOMMAND
 
@@ -65,14 +61,6 @@
  * Command line configuration.
  */
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_EEPROM
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_SUPPORT_VFAT
 
@@ -98,8 +86,6 @@
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
 
-#define CONFIG_AUTO_COMPLETE   1       /* add autocompletion support   */
-
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
@@ -111,18 +97,11 @@
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK            /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       691200
 
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      \
-       { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
-        57600, 115200, 230400, 460800, 921600 }
-
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
 
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
-
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
@@ -133,10 +112,8 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI                     /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST        PCI_HOST_AUTO   /* select pci host function     */
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
                                        /* resource configuration       */
 
 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
@@ -162,7 +139,6 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
-#undef CONFIG_IDE_8xx_DIRECT               /* no pcmcia interface required */
 #undef CONFIG_IDE_LED                  /* no led for ide supported     */
 #define CONFIG_IDE_RESET       1       /* reset for ide supported      */