#define CONFIG_BOARD_PRE_INIT
#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CFG_BOARD_NAME "CPCI750"
+#define CONFIG_SYS_BOARD_NAME "CPCI750"
#define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX"
-/*#define CFG_HUSH_PARSER*/
-#define CFG_HUSH_PARSER
+/*#define CONFIG_SYS_HUSH_PARSER*/
+#define CONFIG_SYS_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_AUTO_COMPLETE 1
/* Define which ETH port will be used for connecting the network */
-#define CFG_ETH_PORT ETH_0
+#define CONFIG_SYS_ETH_PORT ETH_0
/*
* The following defines let you select what serial you want to use
*
* what to do:
* to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
- * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
* to 0 below.
*
* to use the MPSC, #define CONFIG_MPSC. If you have wired up another
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VIDEO_LOGO
#define CONFIG_I8042_KBD
-#define CFG_ISA_IO 0
+#define CONFIG_SYS_ISA_IO 0
#endif
/*
* Miscellaneous configurable options
*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_SPEED 80000 /* I2C speed default */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */
-#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-/*#define CFG_MEMTEST_START 0x00400000*/ /* memtest works on */
-/*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
-/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */
+/*#define CONFIG_SYS_MEMTEST_START 0x00400000*/ /* memtest works on */
+/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
+/*#define CONFIG_SYS_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */
/*
-#define CFG_DRAM_TEST
+#define CONFIG_SYS_DRAM_TEST
* DRAM tests
- * CFG_DRAM_TEST - enables the following tests.
+ * CONFIG_SYS_DRAM_TEST - enables the following tests.
*
- * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
* Environment variable 'test_dram_data' must be
* set to 'y'.
- * CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
* addressable. Environment variable
* 'test_dram_address' must be set to 'y'.
- * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
* This test takes about 6 minutes to test 64 MB.
* Environment variable 'test_dram_walk' must be
* set to 'y'.
*/
-#define CFG_DRAM_TEST
-#if defined(CFG_DRAM_TEST)
-#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
-/*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
-#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
-#define CFG_DRAM_TEST_DATA
-#define CFG_DRAM_TEST_ADDRESS
-#define CFG_DRAM_TEST_WALK
-#endif /* CFG_DRAM_TEST */
+#define CONFIG_SYS_DRAM_TEST
+#if defined(CONFIG_SYS_DRAM_TEST)
+#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
+/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
+#define CONFIG_SYS_DRAM_TEST_DATA
+#define CONFIG_SYS_DRAM_TEST_ADDRESS
+#define CONFIG_SYS_DRAM_TEST_WALK
+#endif /* CONFIG_SYS_DRAM_TEST */
#define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */
-#undef CFG_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */
+#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */
-#define CFG_LOAD_ADDR 0x00300000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
-#define CFG_HZ 1000 /* decr freq: 1ms ticks */
-#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
-#define CFG_BUS_CLK CFG_BUS_HZ
+#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
+#define CONFIG_SYS_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
+#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CFG_TCLK 133000000
+#define CONFIG_SYS_TCLK 133000000
-/*#define CFG_750FX_HID0 0x8000c084*/
-#define CFG_750FX_HID0 0x80008484
-#define CFG_750FX_HID1 0x54800000
-#define CFG_750FX_HID2 0x00000000
+/*#define CONFIG_SYS_750FX_HID0 0x8000c084*/
+#define CONFIG_SYS_750FX_HID0 0x80008484
+#define CONFIG_SYS_750FX_HID1 0x54800000
+#define CONFIG_SYS_750FX_HID2 0x00000000
/*
* Low Level Configuration Settings
*/
/*
- * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
* To an unused memory region. The stack will remain in cache until RAM
* is initialized
*/
-#undef CFG_INIT_RAM_LOCK
-/* #define CFG_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */
-/* #define CFG_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */
-#define CFG_INIT_RAM_ADDR 0xf1080000 /* unused memory region */
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#undef CONFIG_SYS_INIT_RAM_LOCK
+/* #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */
+/* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */
+#define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */
+#define CONFIG_SYS_INIT_RAM_END 0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define RELOCATE_INTERNAL_RAM_ADDR
#ifdef RELOCATE_INTERNAL_RAM_ADDR
-/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/
-#define CFG_INTERNAL_RAM_ADDR 0xf1080000
+/*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/
+#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf1080000
#endif
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* Dummies for BAT 4-7 */
-#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */
-#define CFG_SDRAM2_BASE 0x20000000
-#define CFG_SDRAM3_BASE 0x30000000
-#define CFG_SDRAM4_BASE 0x40000000
-#define CFG_RESET_ADDRESS 0xfff00100
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE 0xfff00000
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */
+#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */
+#define CONFIG_SYS_SDRAM2_BASE 0x20000000
+#define CONFIG_SYS_SDRAM3_BASE 0x30000000
+#define CONFIG_SYS_SDRAM4_BASE 0x40000000
+#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE 0xfff00000
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
#define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */
-#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */
-#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \
- CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \
- CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \
- CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT }
-#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */
+#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of flash banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */
+#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* size of flash bank */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
+ CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT, \
+ CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT, \
+ CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT }
+#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* show if bank is empty */
/* areas to map different things with the GT in physical space */
-#define CFG_DRAM_BANKS 4
+#define CONFIG_SYS_DRAM_BANKS 4
/* What to put in the bats. */
-#define CFG_MISC_REGION_BASE 0xf0000000
+#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
/* Peripheral Device section */
/* Data flash on external device module */
/* Boot flash on external device module */
/*******************************************************/
-#define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
-#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */
+#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
+#define CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */
#undef MARVEL_STANDARD_CFG
#ifndef MARVEL_STANDARD_CFG
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#define CFG_GT_REGS 0xf1000000 /* GT Registers will be mapped here */
-/*#define CFG_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */
-#define CFG_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */
-
-#define CFG_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */
-#define CFG_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */
-#define CFG_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */
-#define CFG_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */
-#define CFG_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */
-
-#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */
-#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */
-#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */
-#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */
-#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */
+#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */
+/*#define CONFIG_SYS_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */
+#define CONFIG_SYS_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */
+
+#define CONFIG_SYS_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */
+#define CONFIG_SYS_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */
+#define CONFIG_SYS_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */
+#define CONFIG_SYS_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */
+#define CONFIG_SYS_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */
+
+#define CONFIG_SYS_BOOT_SIZE _16M /* cpci750 flash 0 */
+#define CONFIG_SYS_DEV0_SIZE _16M /* cpci750 flash 1 */
+#define CONFIG_SYS_DEV1_SIZE _16M /* cpci750 flash 2 */
+#define CONFIG_SYS_DEV2_SIZE _16M /* cpci750 flash 3 */
+#define CONFIG_SYS_DEV3_SIZE _16M /* cpci750 nvram/can */
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
#endif
/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
-#define CFG_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */
-#define CFG_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */
-#define CFG_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */
-#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */
-#define CFG_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */
+#define CONFIG_SYS_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */
+#define CONFIG_SYS_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */
+#define CONFIG_SYS_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */
+#define CONFIG_SYS_DEV3_PAR 0x8FCFFFFF /* nvram/can */
+#define CONFIG_SYS_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */
/* c 4 a 8 2 4 1 c */
/* 33 22|2222|22 22|111 1|11 11|1 1 | | */
/* MPP Control MV64360 Appendix P P. 632*/
-#define CFG_MPP_CONTROL_0 0x00002222 /* */
-#define CFG_MPP_CONTROL_1 0x11110000 /* */
-#define CFG_MPP_CONTROL_2 0x11111111 /* */
-#define CFG_MPP_CONTROL_3 0x00001111 /* */
-/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */
+#define CONFIG_SYS_MPP_CONTROL_0 0x00002222 /* */
+#define CONFIG_SYS_MPP_CONTROL_1 0x11110000 /* */
+#define CONFIG_SYS_MPP_CONTROL_2 0x11111111 /* */
+#define CONFIG_SYS_MPP_CONTROL_3 0x00001111 /* */
+/* #define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102*/ /* */
-#define CFG_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/
+#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/
/* setup new config_value for MV64360 DDR-RAM To_do !! */
-/*# define CFG_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */
-/*# define CFG_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */
+/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */
+/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */
/* GB has high prio.
idma has low prio
MPSC has low prio
virtual interleaving enable */
/* 15 14 13:0 */
/* 0 1 0x400 */
-# define CFG_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/
+# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/
/*-----------------------------------------------------------------------
#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
/* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE 0x80000000
-#define CFG_PCI0_MEM_SIZE _128M
-#define CFG_PCI1_MEM_BASE 0x88000000
-#define CFG_PCI1_MEM_SIZE _128M
+#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE _128M
+#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE _128M
-#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
-#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
/* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE 0xfa000000
-#define CFG_PCI0_IO_SIZE _16M
-#define CFG_PCI1_IO_BASE 0xfb000000
-#define CFG_PCI1_IO_SIZE _16M
+#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE _16M
+#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE _16M
-#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI 0x00000000
-#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI 0x00000000
+#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
+#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
-#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE)
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
#if defined (CONFIG_750CX)
-#define CFG_PCI_IDSEL 0x0
+#define CONFIG_SYS_PCI_IDSEL 0x0
#else
-#define CFG_PCI_IDSEL 0x30
+#define CONFIG_SYS_PCI_IDSEL 0x30
#endif
/*-----------------------------------------------------------------------
#define CONFIG_IDE_RESET /* no reset for ide supported */
#define CONFIG_IDE_PREINIT /* check for units */
-#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */
-#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 1 IDE busses */
+#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
-#define CFG_ATA_BASE_ADDR 0
-#define CFG_ATA_IDE0_OFFSET 0
-#define CFG_ATA_IDE1_OFFSET 0
+#define CONFIG_SYS_ATA_BASE_ADDR 0
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0
-#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
/*----------------------------------------------------------------------
*/
/* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
/* init ram */
-#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
/* PCI0, PCI1 in one BAT */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
/* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/*
* 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7)
/*#define SETUP_HIGH_BATS_FX750*/ /* initialize BATS 4-7 */
#ifdef SETUP_HIGH_BATS_FX750
-#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
/* IBAT5 and DBAT5 */
-#define CFG_IBAT5L (CFG_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT5U (CFG_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L (CFG_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT5U CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
/* IBAT6 and DBAT6 */
-#define CFG_IBAT6L (CFG_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT6U (CFG_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L (CFG_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
/* IBAT7 and DBAT7 */
-#define CFG_IBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT7U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT7U CFG_IBAT7U
+#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
#else /* set em out of range for Linux !!!!!!!!!!! */
-#define CFG_IBAT4L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
/* IBAT5 and DBAT5 */
-#define CFG_IBAT5L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT5U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT5U CFG_IBAT4U
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U
/* IBAT6 and DBAT6 */
-#define CFG_IBAT6L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT6U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U CFG_IBAT4U
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U
/* IBAT7 and DBAT7 */
-#define CFG_IBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT7U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT7U CFG_IBAT4U
+#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U
#endif
/* FIXME: ingo end: disable BATs for Linux Kernel */
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_BOOT_FLASH_WIDTH 2 /* 16 bit */
+#define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */
#if 0
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CONFIG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
+/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
#endif
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
-#define CFG_EEPROM_PAGE_WRITE_BITS 5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CFG_I2C_EEPROM_ADDR 0x050
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x050
#define CONFIG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/
-#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
-#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
-#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40)
+#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */
+#define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* look in include/mpc74xx.h for the defines used here
*/
-/*#define CFG_L2*/
-#undef CFG_L2
+/*#define CONFIG_SYS_L2*/
+#undef CONFIG_SYS_L2
/* #ifdef CONFIG_750CX*/
#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_BOARD_ASM_INIT 1
+#define CONFIG_SYS_BOARD_ASM_INIT 1
#endif /* __CONFIG_H */
projects / people / ms / u-boot.git / blobdiff